Jump to content

Help with sons xmas gun please..bulldog


asadunkley
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

  • Supporters

Not likely. As long as you can turn it its fine. Feel free to post s pic and we will confirm for you.

Link to comment
Share on other sites

  • Supporters

On bottom of mag?..winder?

 

usually its on the bottom of the mag, but sometimes on the side. Or it can be a flash mag, in which case the bottom base of the mag flips down to reveal a string that is pulled instead of a wheel.

Link to comment
Share on other sites

  • Supporters

If it's a normal high capacity mag

Then fill with bbs then wind wheel until bbs appear

 

AND KEEP WINDING to increase tension

You need a good/lot of tension to feed

 

Should say this in manual if you got one

Keep winding mag a good dozen or so

It should make a funny click when it reaches full tension

Then it should fire say 20 bbs or so

After that 20 bbs you will need to wind again

As gun will cease to feed once more

Link to comment
Share on other sites

  • Supporters

Is the wheel supposed to be raised out?..as this one seems recessed?

It doesn't stick out a great deal, I have a few mags

Exactly same mag n model some wheels stick out a tiny bit more than others

You are probably only got say 5 o'clock to 7 o'clock showing

 

If gun is turning over, or cycling as we say

If mag is fully wound it should just work

 

Keep us updated, please ffs test outside not inside

Bb's bounce a lot remember eyepro and tons of common sense

 

Gun's hop could be fully on or a jam

But I am assuming this is guns first outing so should just work

 

Please please please remember safety

 

Eye protection, common sense, remove mag and fire gun a few times to clear gun of bbs's

There is nearly always a bb left in gun

This HAS to be cleared ALWAYS !!!!

 

Seriously, safety is above everything else

Stay safe not just Xmas but always

Link to comment
Share on other sites

  • Supporters

It has no pronounse wheel on mag to wind if anything is sunken in mag...other end were bbs are loaded it looks like bottom should come off but dont want to break it for him...tried to upload pics but its saying file too big!

use photobucket or imgur. AFUK has weird file size limitations

Link to comment
Share on other sites

  • Supporters

Ok, I just looked up the gun and the wheel is on the bottom of the mag and doesn't seem to protrude very much at all.

Link to comment
Share on other sites

  • Supporters

If it has a wheel it should need winding

 

Not being funny what does manual or website say ?

Old chubby JamWow normally gives a review

And demonstrates in his professional way how to load the mag with 75% of bbs dropping on the floor

 

The wheel should have slight teeth on it

To help with winding

Think M4's wind forward

&

AK's wind back but this depends which way you view the magazine itself so to speak

 

You fill the mag or at least half full

BB's won't appear at top until you wind

Keep winding ratching up the tension

Until it clicks

 

This is common user error an understanding of how mags work

 

Wind it up, place in gun, wind a bit more

Link to comment
Share on other sites

just goodled this gun to see just what mag you get out of the box, and it looks like you dont get a high cap mag as standard, just a mid cap one so there won't be a winder to wind.

 

let us know if you bought an extra mag or not.

 

can you post a pic of the top of the mag as well?

Link to comment
Share on other sites

sounds like you need to fill it with more BB'S , with a hicap mag you wont ever empty it 100%, the feed tube will still contain bb's , to empty that feed tube you turn the gun upside down, which you dont do , at that point you fill the mag back up as its technically empty..

Link to comment
Share on other sites

  • Supporters

just goodled this gun to see just what mag you get out of the box, and it looks like you dont get a high cap mag as standard, just a mid cap one so there won't be a winder to wind.

 

let us know if you bought an extra mag or not.

 

can you post a pic of the top of the mag as well?

 

 

lol - just beat me to it

 

most starter guns you normally get a hi cap with winding wheel

hence we saying just bloody wind it as it is a common mistake not to wind or keep winding

 

a few guns - this SRC being one of them comes with a 45rnd low/real cap

 

other SRC's come with 400 rnd high caps like this:

 

https://www.justbbguns.co.uk/product/2-tone-airsoft-guns/2-tone-aeg-rifles/4072/src-pro-ak47-airsoft-gun-orange

 

JBBG are $hite I'm afraid especially no bloomin' manual for newcomers - i'd made sure one was in there

 

you may need to get either a hi cap or a speed loader to use the existing mag

wtf a 45 rnd mag I'll never know but no loader - even a few quid cheapo one

Link to comment
Share on other sites

  • Supporters

So it seems like you probably got a 45 rnd mag so forget all the winding posts I made

 

now you will need a speed loader:

 

SPEED-LOADER-2.jpg?1474820175

 

bit of a bummer - jeez they could of shoved in a cheapo few quid one like pic (90rnds or so for pistols/sniper)

 

or you buy a higher capacity loader like this:

 

HT-BIM-6-lg.jpg

 

or you can buy a hi cap mag with wheel:

 

Magazynek-Hi-Cap-do-AK47_-500x500.jpg

 

though it "should be compatible" but this is not always the case

 

 

Now if you can force the bb's into the low cap one by one - bit tricky but can be done - very tedious

is there a tube/rod - had something like that to fill a crappy spring famas

very crude but did work - avoid famas springer - the tube/rod is about the only good thing left working on that

 

 

I ask where abouts are you - reason being you might want to take gun with you to a local shop for a new mag

most mags do work ok - some ak mags might need a tiny bit of modding on certain guns/mags

this is not always the case - but on occasions some ak's may not fit or click into place on every gun

 

hence me asking where you are based - you could try a store or even a local site with a shop

bring gun - test mag fits etc - or you buy a loader or take a chance and buy mag online

 

bummer - but you should be able to force in a dozen or so bb's to test the gun out

you need at least 6 - maybe a dozen coz at least the last 3 or 4 bb's will not feed

 

yeah you should be able to jam some bb's in there for a few shots - PITA but should get a play with it

Link to comment
Share on other sites

yea looks like a low cap that requires a speed loader https://www.justbbguns.co.uk/product/discontinued-airsoft-guns/airsoft-guns/3085/bulldog-ak47a-airsoft-gun but every low cap/spring mag iv ever had discharges every single bb without the need to turn it upside down..so might be a problem with the mag?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...