Jump to content

Motor problem


Msjhansen
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Sounds like my g3 did when it was locking up gear mine was one too many shims on the pinion gear top not enough on bottom so gears were either scraping tight or complete lock half way through a cycle

Link to comment
Share on other sites

It seems to work better after you swapped over the pistol grip. Did the problems start with the swap to the tan one? If so, it might be that the grip isn't compatible with the lower receiver. As regards the stopping in the last video, that sounded more like a drained battery than anything else. Try charging the battery and then reset the motor height in the black grip so that you get the smoothest noise from the motor whilst in full auto mode without the top receiver fitted. This is usually about one full turn back from where the motor makes a skreechy sound on its highest setting in the grip and still turns.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...