Jump to content

m4ris plastic series battery question.


karl_liverpool
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

i currently have an src m4 ris. bought used for buttons. worked fine. second charge of battery and i got not kick up from gun.

after stripping i found the neg lead had come out of the mini tamiya gunside. replaced the end with new connector. gun worked fine till battery died. charge again, and when connected to gun fired twice and smoke from the battery in crane stock. stripped and checked all wires for shorts no problems anywhere.

 

would this be a failed battery or another fault eleswhere in the wiring system?

Link to comment
Share on other sites

Sounds not mechanical although gearbox or motor could be under strain causing wires to overheat and kill the gun worst case scenario. But I'd check it on a 7.4 lipo and see what it's like just because your battery may not have enough juice

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...