Jump to content

Should I upgrade my barrel on my Krytac


NathyB
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I've seen a madbull Python tightbore barrel on Amazon and I'm thinking should I swap the barrel out will it provide that much more accuracy and increase fps ? Or is my stock barrel good enough as the hole reason I got a Krytac was because its a good stock gun any thoughts is appreciated 👍🏻

Link to comment
Share on other sites

Krytac stock barrels are ace, I only fitted a PDI to my SPR as I had one from my SRS sniper rifle. Stock hop is awesome too.... Krytac Tridents need nothing doing to them except maybe a barrel clean.

Link to comment
Share on other sites

  • 3 weeks later...

Hi Bud.

The stock Krytac parts are all good. If not broken would recommend, not to fix it.. Spend a bit of time getting your Hop Up 100% perfect, which will make a lot more difference than 5 or 10 fps. .

Also there is a fair bit of discussion at preset as whether a tighter bore gives better accuracy or not. Best left well alone in my opinion.Hope this is helpful.

Link to comment
Share on other sites

Hi Bud.

The stock Krytac parts are all good. If not broken would recommend, not to fix it.. Spend a bit of time getting your Hop Up 100% perfect, which will make a lot more difference than 5 or 10 fps. .

Also there is a fair bit of discussion at preset as whether a tighter bore gives better accuracy or not. Best left well alone in my opinion.Hope this is helpful.

Hey dude, I'd look at changing your user name rather than having your email addy as it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...