Jump to content

Umarex MP7 Mag fill valve


Von Nimble
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hello everyone,

 

Looking for some advice from some seasoned MP7 users out there.

 

I'm current running and Umarex/KWA/KSC/VFC MP7 and one of my mags has a leak and i have found the issue to be in the fill valve, I need either a new fill valve or a new o ring.

 

Would anyone happen to know if the Kriss Vector ones with work here or where I can get a valve which would work?

 

Many thanks in advance for any help!

Link to comment
Share on other sites

  • Supporters

Hi so long as you use the same manufacturer you should be ok.

 

I know my KSC M93R Mags fill valves fit my KWA Vector Mags as KWA and KSC are cross compatible companies

Link to comment
Share on other sites

Have you tried soaking the o-ring in silicone oil ?? I've done it as one of my sons didn't tell me it was empty of gas :/ I let it soak about 10 minutes & it was fine after that

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...