AndyGif290368 Posted July 15, 2016 Share Posted July 15, 2016 just come back to Airsofting again after long gap.... the requirement for a "defence" was just coming in as i was going out. To cut a long story short i'm looking to rebuild my original set up of G3's, the SG1, A4 and MC51. They seem to be hard to get hold of these day's all my old ones were TM's, not that there seems to be any of those available currently. I see that JG do a range of G3's so might have to get those but they only appear to do HI-Caps. Now to the actual question, would TM G3 low cap mag fit in the JG G3 and feed ok? {stuck with the two tones till i get a UKARA reg number..... so the G3's are on the back burner at moment} Cheers AndyG Link to comment Share on other sites More sharing options...
Supporters Monty Posted July 15, 2016 Supporters Share Posted July 15, 2016 Yep, they'll work, the JG G3 is a Marui clone. Welcome back to the hobby by the way. Link to comment Share on other sites More sharing options...
AndyGif290368 Posted July 15, 2016 Author Share Posted July 15, 2016 thanks a lot has changed in my absence, some for the better and some not so. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.