Supporters SeniorSpaz87 Posted May 23, 2016 Supporters Share Posted May 23, 2016 Hello all, I have the wish to convert my TM MP7 to HPA. I already have a mag on the way that will take care of the actual HPA part, but I am wondering what else I need to get for my MP7 (internally). I know that TM GBBs tend to be rated for a lower pressure, so I figure I'll have to get some steel parts or something. Also, if I do make this transition, I would like to still be able to use my GBB mags in it as well, if at all possible. Any ideas or suggestions? Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 23, 2016 Supporters Share Posted May 23, 2016 No need. Unless you're intending to run it at significantly higher pressure than would be required for ~400fps the stock parts will be fine until the nozzle cracks. That could happen 20 shots in or 2,000 shots in, no way of knowing and no way of stopping it. Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted May 23, 2016 Root Admin Share Posted May 23, 2016 Edit Why did I read that as M870? Help... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.