Trojan Posted May 19, 2016 Share Posted May 19, 2016 My gun seems to only feed with the front receiver pin removed and the barrel pushed forward, Any ideas on how I could fix https://i.imgur.com/qfAxkgC.jpg Link to comment Share on other sites More sharing options...
Guest PT247 Posted May 19, 2016 Share Posted May 19, 2016 are the internals standard? Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted May 19, 2016 Supporters Share Posted May 19, 2016 Try other mags n crap New nozzle too long Or Worn tappet plate Nozzle is not clearing to chamber bb is most likely issue Link to comment Share on other sites More sharing options...
Trojan Posted May 20, 2016 Author Share Posted May 20, 2016 Try other mags n crap New nozzle too long Or Worn tappet plate Nozzle is not clearing to chamber bb is most likely issue its not clearing, how would i sand it evenly Link to comment Share on other sites More sharing options...
Supporters Samurai Posted May 20, 2016 Supporters Share Posted May 20, 2016 No. Just put a proper M4 nozzle in it. Link to comment Share on other sites More sharing options...
Supporters sp00n Posted May 20, 2016 Supporters Share Posted May 20, 2016 How old is the gun? Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted May 20, 2016 Supporters Share Posted May 20, 2016 what nozzle is in there - a SCAR one @ 28.5mm or something like G36/AUG @ 24mm should be about 21.3 to 21.45mm aprox for most m4's that is some distance = some mofo nozzle or something correct nozzle length is critical, yes you can do a few mods n tweaks but ffs not THAT much... its not clearing, how would i sand it evenly With an angle grinder more like than a dremmel or file measure nozzle and test against bucking blah blah blah..... should really use something as close as possible to correct nozzle length it would help if you explain exactly what you or the other guy did or didn't do or how you came about this odd mofo setup (reason I ask is often a number of things took place and might be more than just one thing that is out of whack - so as much info & honesty as possible will help from the start) Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 20, 2016 Supporters Share Posted May 20, 2016 Could be a worn/misaligned tappet plate also, there's so many variables here. Chances are you just have a nozzle that's too long though. Link to comment Share on other sites More sharing options...
Trojan Posted May 20, 2016 Author Share Posted May 20, 2016 thanks everybody. sanded nozzle using dremel. perfect. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.