Jump to content

AUG Hop up unwinding itself?


Cipher-032
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Noticed today during using the gun at todays skirmish, after setting the hop, it would unwind with vibrations.

Any one know a "fix" or how to stop it from doing this?

Its a stock plastic hop unit from a ASG AUG A3 Commando.

 

Metal hop unit the way to go? Blu-tac on the adjuster wheel?

Any help is appreciated!

Link to comment
Share on other sites

  • Root Admin

Also make sure you've not got any grease or anything on the gears or around the unit. Just use some isopropyl alcohol to remove. Even just a bit of dry kitchen towel helps too if you've not got any. Shouldn't make a massive difference though.

Link to comment
Share on other sites

Also make sure you've not got any grease or anything on the gears or around the unit. Just use some isopropyl alcohol to remove. Even just a bit of dry kitchen towel helps too if you've not got any. Shouldn't make a massive difference though.

All clear and clean from any grease or lube prior to yesterdays skirmish. Its just plastic crap parts, but no doubt it would do the same with a metal hop unit. The teflon tape has made it nice and snug now :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...