Jump to content
Sign in to follow this  
Liamc93

Tokyo Marui Glock 26 problem

Recommended Posts

Hi, I was hoping someone can help with this problem

 

 

It is not the magazine as I've tried 3 different ones, have lubricated gun.. any ideas on what it can be or how I can diagnose it??

 

Many thanks!

Share this post


Link to post
Share on other sites

Difficult to tell without a strip down, but it may be that the valve in the blowback mechanism in the slide is stuck closed. Try squirting some silicon spray into the hole in the mechanism that points towards the BB and see if that will free it.

Share this post


Link to post
Share on other sites

Ok I found the problem, this pin that triggers the pin on magazine doesn't go all the way back in, only half way so it just expels all the gas.. I can push it in and it clicks into place, any idea what I need to replace to fix it? thanks

post-12284-0-43892700-1449153745_thumb.jpg

post-12284-0-47582700-1449153747_thumb.jpg

Share this post


Link to post
Share on other sites

My bad, the slide has a pin it pushes down to automatically push pin in, no idea what it is still... ! :@

Share this post


Link to post
Share on other sites

Have you lubed up the hammer mechanism? Short of taking it apart and putting it together (fiddly to say the least for most gbbs) it might be the only thing to do

 

Edit, just read the post above properly. Maybe an internal lube could help.

 

Otherwise, how does the slide feel moving back, is it stiffer than usual (indicating resistance in a moving part, or a jammed part) is there any dirt or crap where there shouldn't be?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×