Jump to content

Where to find CYMA spare parts???


ronin677
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi guys,

 

I need to find a replacement bolt, spacer and sprung knob for my CYMA AK74. Any ideas where I can find these parts? See photos.

 

Bolt & spacer

20150813_193036.jpg

 

Sprung knob in stock

20150813_193044.jpg

 

Area missing parts

20150813_193915.jpg

 

cheers

 

Jon

Link to comment
Share on other sites

Got cheapo crap like that

That "might" do the job.....

 

Folding AK stock bits n bobs that could fit

 

Didn't chime in earlier coz thought you was after bespoke m14 hop or something

But 74 stuff might be able to use /help

You got the bits that might do the job? Would be mighty appreciative if you had :)

Link to comment
Share on other sites

  • Supporters

2 bolts, 2 brass sleeves + 2 sprung lugs/bullets

oooh dunno special order them mofo's

 

£3 posted ??? - can just chuck 'em in a jiffy bag

 

It came off the AKFrizzle 901c crappy double eagle krinkov bollox

but them bits and the folding stock should be compatible

(99% reckon it is probably made by Cyma or JG I would of thought)

 

if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway

£6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars

 

it should work with just screws/sleeves/lugs etc.....

you shouldn't need any of the 901c stock itself really

 

worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok

Link to comment
Share on other sites

CYMA stuff seems to either be welded solid with threadlock from the factory or have none at all and go flying into the undergrowth never to be seen again.

I got an M14 from CYMA and some bright spark had threadlocked the hop adjustment wheel!

A £3 investment in decent threadlock is far better than forking out a load for replacement parts, if you can find them.

Link to comment
Share on other sites

2 bolts, 2 brass sleeves + 2 sprung lugs/bullets

oooh dunno special order them mofo's

 

£3 posted ??? - can just chuck 'em in a jiffy bag

 

It came off the AKFrizzle 901c crappy double eagle krinkov bollox

but them bits and the folding stock should be compatible

(99% reckon it is probably made by Cyma or JG I would of thought)

 

if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway

£6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars

 

it should work with just screws/sleeves/lugs etc.....

you shouldn't need any of the 901c stock itself really

 

worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok

Send me your Paypal addy and I'll send you the £6 :)

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...