Jump to content
Sign in to follow this  
airsofter2015

Hopup on the CM16

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Recommended Posts

im fairly new to airsoft so it might just be something im doing wrong but when i try to adjust the hop up on my raider it is very stiff and barely moves could anyone help me out

Share this post


Link to post
Share on other sites

They can be. Try slightly backing off the small screw that holds the biggest wheel in place. If that doesn't work, take the hop and inner barrel out of the gun and turn it back from full on to full off about a dozen times to loosen everything off. If it's still tight, take off the larger wheel and the one it connects to, as it could be the wheel hubs are very tight on the pegs they sit on. Try then opening out the hole in the wheel hub very very slightly with a small nail or similar, or a very fine needle file.

Share this post


Link to post
Share on other sites

thanks ill try that

Share this post


Link to post
Share on other sites

Just be aware, if you slacken it off too much then the hop will creep back off and not stay where you want it set.

Share this post


Link to post
Share on other sites

If you still can't do it I would recommend getting something like a CNC pro win hop up unit. In my opinion I think that they are one of the best hop ups out there and easily compete with madbull hop up units. They are £25 so they don't damage your wallet too much and they are pretty easy to install. And they also sove your problem where you can't turn it as it has a circle dial that you turn to adjust it.post-10894-0-94926500-1439025116_thumb.jpg

 

Hears mine.

Share this post


Link to post
Share on other sites

Ive sorted it now but thanks anyways.

Share this post


Link to post
Share on other sites
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...