Jump to content

CYMA AK 47 Hi Cap problem


This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) topic.

Recommended Posts

I have a cyma ak hi cap mag ( bright orange bakelite look a like) which stopped feeding mid skirmish. It is wound up but the bb's just will not push up to the top. The main reservoir is empty and there are bb's in the tube lower down but they are stuck.

I cant find anything that will release the spring tension.

 

Any advice/ assistance, fellas?

Link to post
Share on other sites

Give it a firm knock on a hard surface (such as a kitchen worktop, maybe wrap a tea towel round it to prevent marking the mag/worktop lol). This should then push the bbs up if they are still under tension.

 

Sounds like a misformed bb or dirt.

Link to post
Share on other sites

As Straffham says, it is probably just a bit of crap or possibly some distortion on a BB jamming things up, and giving the mag a smart tap on a hard surface will probably free things up. You don't have to hit it too hard, just do it a bit like you would do with a real magazine when you smack it on your helmet, to make sure it won't jam, before popping it in the weapon.

 

If that does not work, try getting a drinking straw down through the feed hole to dislodge the jam, just see if you can use it to push the top BB back a little then release and see if that sorts it out.

Link to post
Share on other sites
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...