Jump to content

M14 Electric problem


Doma_Tassi
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hello!

I have a Cyma M14 AEG airsoft gun. But it doesn't work. The motor doesn't make any sound. I've looked the wires with an digital multimeter and i realized the power doesn't reach the motor. The photo is showed. The red circle is where i got power and the green is where not. What is the problem? How can i fix it?

Thanks for helping me!CM_ACC_CM07_M14_GB_1_MARK.jpg

Link to comment
Share on other sites

  • Supporters

You will probably need to buy a new trigger switch or contact plates for it (I don't know what type of switch mechanism that gun uses). Should be quite easy to do if you can find the right parts though.

Link to comment
Share on other sites

  • Supporters

Yeah, as Lozart and macko-ricsi said. ;)

Check the contacts and if the trigger moves the moving part at all. You might have to remove the outer assembly of the gearbox, which is not exactly a simple thing on an M14 but if you keep an eye on the little springs (including the one in the safety switch) you should be fine.

Link to comment
Share on other sites

  • Supporters

I took apart the left side of the gearbox. The end of the trigger switch is sooty, if i clean it part, it will work again?

 

It may do. Sooty contacts suggest that they are arcing though. What battery are you using?

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...