Jump to content

Does barrel length make a difference in range for aeg's ?


Wardy27
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Also... Extremely long barrels help up to a point. That's because they help stabilise the bb... But that's extreme range stabilisation, so nothing a normal aeg would reach.

Link to comment
Share on other sites

Also... Extremely long barrels help up to a point. That's because they help stabilise the bb... But that's extreme range stabilisation, so nothing a normal aeg would reach.

 

Nope, another misconception. Widebore's do that, having a very long barrel does not.

Link to comment
Share on other sites

Yes, barrel length does affect range; a longer barrel has a good chance of reducing the range on an airsoft weapon, and possibly reducing the accuracy as well.

 

It's common for people to confuse the attributes of firearms with those of airsoft when it comes to ballistics, thinking everything is equitable, but it's a mistake to do so. With firearms, the reason for extended barrel length is to allow more of the charge to build up the projectile's speed as the propellant gas expands behind it, and to put a sufficient spin on the projectile via the rifling. Beyond these two physical behaviours which the barrel length is imparting on the projectile as it travels down it, the longer barrel itself has little to do with how accurate the projectile will be, unless one considers that a long barrel might assist in pointing the thing in the right direction. There is no 'build up of gasses behind an airsoft BB and no rifling either, the only thing in there which assists with range is the hop up mechanism. In fact, the turbulence the BB encounters as it travels down the enclosed space of the barrel in an airsoft is likely to render it slower due to aerodynamic drag, and less stable due to buffeting; the sooner a BB is in free air, the less of that it will encounter.

Link to comment
Share on other sites

I haven't seen much in the way of tests and proof but I have certainly read that around 450mm is the optimal length for a normal cylinder and that this produces the best possible accuracy, but also in the same comment the same people are saying length doesn't really matter very much at all.

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...