Jump to content
Sign in to follow this  
Imanairsofter

Springs

Recommended Posts

I need a spring that will give my gun an FPS of around 320, this means I can play at my local CQB centre. what should it be , M90 M100 ext??

Share this post


Link to post
Share on other sites

Usually m90 springs will give ~295 fps and an m100 will give ~325 fps, so it depends on how much leeway your site gives over that limit. For example some sites list 328 as their limit but have a tolerance up to 350, any gun even .1 fps over can't be used.

 

Because of this I always choose m90 springs for my rifles as it's comfortably within most site limits even if I sacrifice that extra fps boost.

Share this post


Link to post
Share on other sites

Usually m90 springs will give ~295 fps and an m100 will give ~325 fps, so it depends on how much leeway your site gives over that limit. For example some sites list 328 as their limit but have a tolerance up to 350, any gun even .1 fps over can't be used.

 

Because of this I always choose m90 springs for my rifles as it's comfortably within most site limits even if I sacrifice that extra fps boost.

 

Be wary of quoting direct x spring = y FPS. I'm currently running an M95 in my M4 and it hits consistently at 345fps. Actual muzzle velocity depends greatly on how good your air seal is.

Share this post


Link to post
Share on other sites

M90 means 90 M/S, so ~ 295 FPS.

An M100 = ~328 FPS.

 

As Lozart said though there can a big difference in actual velocity. You could alternatively cut down your existing spring to reduce power.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...