Jump to content

JG Bar 10 Upgrades


This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

SHS steel sear set- about 15 quid from ehobby

 

Dangerwerx type B lever- 20 quid from ASPUK

 

Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods.

 

DIY mods-

 

Seal hop up buckings with dental floss

 

Seal cylinder with PTFE

 

Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful.

 

Thoroughly wash the hop up buckings in fairy liquid

 

do the google dance for more class DIY mods. Plenty can be done on the cheap.

Link to comment
Share on other sites

SHS steel sear set- about 15 quid from ehobby

 

Dangerwerx type B lever- 20 quid from ASPUK

 

Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods.

 

DIY mods-

 

Seal hop up buckings with dental floss

 

Seal cylinder with PTFE

 

Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful.

 

Thoroughly wash the hop up buckings in fairy liquid

 

do the google dance for more class DIY mods. Plenty can be done on the cheap.

How nice will performance be then?
Link to comment
Share on other sites

My old BAR10 had

 

ASPUK - piston

ASPUK - cylinder head

ASPUK - 150 spring

SCS sear set

WE hop rubber

Dangerworx type B hop arm

 

I also did the PTFE tape mods and made some leccy tape barrel spacers

 

Just a little bit over you £50 budget but that saw 507FPS on a .2 and some great range.

Link to comment
Share on other sites

SHS steel sear set- about 15 quid from ehobby

 

Dangerwerx type B lever- 20 quid from ASPUK

 

Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods.

 

DIY mods-

 

Seal hop up buckings with dental floss

 

Seal cylinder with PTFE

 

Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful.

 

Thoroughly wash the hop up buckings in fairy liquid

 

do the google dance for more class DIY mods. Plenty can be done on the cheap.

Are there any TM hop ups for the Bar 10?
Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...