Jump to content

Disappointment with G&P SR25 DMR


FNG
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi All,

 

Not long purchased the above Magpul Special edition. FPS was 320, had that uprated to 420 and had a Mosfet put in and the Safety catch "pinned" so will only fire single shot.

 

Had a problem with magazines not feeding, turned out to be the hop up (bucking?)was not seated correctly, back to the shop. Then I was getting a series of drop short BBs every other trigger pull, so back to the shop, its there as I write.

 

Really, really disappointed with the range on it, I have a Cyma MP5 SD6 (with a few upgrades on it) that fires at 350 fps and its outranging the SR25!!! Mind you saying that as you can see from above, not really had a chance to get any bbs down range to test it. It is a nice solid good looking rifle (the most money I have ever laid out on one piece of kit)and I hope that when I pick it up this time(!) its 100% or may have to re-think and maybe refund. After all whats the point of a DMR that doesnt perform as a DMR??? Oh, batteries are 7.4v lipos. BBs are 0.25s. Magazine is the Pmag 140 rd that came in the box with it. Did buy two D-Boys sr25 mags which are absolutley useless.

Link to comment
Share on other sites

  • Supporters

You should always expect to upgrade a gun if you want a sniper rifle or dmr, stock guns don't cut it.

Swap out the hop rubber and barrel, they're weaker points in g&ps. The rubber isn't so bad but takes a very long time to wear in compared to most.

Link to comment
Share on other sites

You should always expect to upgrade a gun if you want a sniper rifle or dmr, stock guns don't cut it.

Swap out the hop rubber and barrel, they're weaker points in g&ps. The rubber isn't so bad but takes a very long time to wear in compared to most.

Agreed as above. Ive been wanting to build a DMR project since the day ive started but it seems so much hastle and money so ive disciplined myself to stay away from them.

Link to comment
Share on other sites

Hi M_P and CaptainDumbass,

 

Thanks for replying.

 

The shop put in a tightbore barrel and new hop up as part of the uprate (sorry, should have been upgrade). New faster motor (higher torque) also. So really dont understand the problem. But, pick it back up on Saturday, out shooting on Sunday so will see how it goes. Unfortunately Im in no way shape or form techie minded so I heavily rely on the shop tech guy getting it right!

Link to comment
Share on other sites

FPS doesnt always equal distance, the hop is important on that front. the fps behind a good bucking should mean that it gets to that distance faster and can put heavier BBs faster. what sort of distance are you expecting??

Link to comment
Share on other sites

I think what he means is that in real steel the performance of a gun can we judged on its looks; a longer barrelled specialised gun like an SR25 will outrange an M4. But in airsoft terms that length and 'looking like a DMR' does not mean it will be any better than a shorter rifle at all. People who have 'true' airsoft DMRs have put a lot of work into the internals to get that effect, and frankly they could just drop the same internal set-up into a much shorter gun and get roughly the same result.

Link to comment
Share on other sites

I think what he means is MR B stated "they're normal AEG's" and kiwi was joking around at how ironic MR B's comment was, as he has 3, soon to be 4 DMR's that are GBB

Link to comment
Share on other sites

  • 3 weeks later...

Hi Moose87,

Lets put it this way. I have a Cyma MP5 SD6 that is out ranging the SR25. Have taken it out just to test fire and still not impressed. Starts of with the bb (.25s) going about 30' the next one will go 35' then 40ish and so on. Its almost like its warming up (which I suppose it could be?). Going to Dragons Lair on Sunday, so will take it out again to see whats what. The shop I bought it from are there as well so I can get them to come and 'witness' and see where we go from there.

Link to comment
Share on other sites

Hi Moose87,

Lets put it this way. I have a Cyma MP5 SD6 that is out ranging the SR25. Have taken it out just to test fire and still not impressed. Starts of with the bb (.25s) going about 30' the next one will go 35' then 40ish and so on. Its almost like its warming up (which I suppose it could be?). Going to Dragons Lair on Sunday, so will take it out again to see whats what. The shop I bought it from are there as well so I can get them to come and 'witness' and see where we go from there.

 

Cyma weapons have an H-Nub in the hop unit as standard. This is probably why it's doing better than the G&P as other members have posted that G&Ps have barrel and hop problems OOB.

Link to comment
Share on other sites

  • Supporters

It takes a lot of fiddling to put together a decent DMR - or actually any really good performing gun. Meaning: shops usually don't do it. They put some good internal parts into it and hope that does the job well enough that the user won't return the next week. Usually they don't have the time/interest/loving a DMR needs. :)

Link to comment
Share on other sites

Took it to Dragons Lair on Sunday just gone. One of the guys from the supplier helped me with the hop up and zeroing in. Still has a few teething problems. When I load a mag (all Magpul Pmags now!!) and start shooting, the first 5 or 6 BBs go out to 20 ft, 30ft, 40 ft then it starts to reach out and touch, Babe! (sorry, couldnt resist that!).

 

One of the guys on their Facebook page actually stated that 'the range on it was awesome'. I must admit I had a good day and was hitting 75% of what I was aiming at.

 

Guess I just have to put a lot more 'rounds' down range to shoot it in?

Link to comment
Share on other sites

  • 2 weeks later...

More disappointment FFS!!!

 

Out yesterday (Sunday) just walked to the start point (defend the bunker). Fired off a couple of warmers into the bank. Now remember this is a DMR. Supplier locked it into single shot only, no auto as per the rules. Knelt down, fired off another round and the thing went into full auto! Quickly aimed it away from the advancing troops, frantically trying to switch back into 'safe' mode only for the safety catch to do a 360% turn around!!

 

Had to walk off through the advancing, bemused, enemy with the magazine removed and the gun still firing until the battery ran down and out! Teddy is definately going in the corner this time with all of his/her apendages removed!!!

Link to comment
Share on other sites

Ohhh dragons lair! dunno if the same people run it but he was pretty bad when i met him at a different site.

 

yer get it looked at mate clearly something wrong if its brand new

Link to comment
Share on other sites

That sucks balls dude. As and when you get it fixed i would suggest that yoi get some heavier ammo for it. You should see a real improvement in your groupings! You might have to experiment a little to find the correct weight!

Link to comment
Share on other sites

  • Supporters

No of course they aren't. This is an issue that could happen to any gun tbh, I think the ares lmgs were quite susceptible but having put something like 150rds through g&p AR15 I can safely say it's not a common issue. Just bad luck probably all manufacturers have bad guns, even those with very high reliability and qc like tm.

 

Saying this is why I'd never buy a g&p is like saying I'd never buy a g&g because a few mosfets have broken on gen 3s. The reality is that there will always be issues on guns regardless of brand, you just have to hope yours won't.

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...