Jump to content
SuicidalBarrelRoll

G&G Combat Machine M4 Shorty

Recommended Posts

Right, so I am pretty new to airsoft.

I want the gun mentioned above.

Are there any issues that I should be aware of?

Is the flash hider removable with 14mm CCW threads?

Thanks.

Share this post


Link to post
Share on other sites

No issues as far as I know. The G&G Combat Machine M4s are great quality - both internally and externally.

I'm also 99% sure that the barrel is threaded (unlike TM-spec rifles like my CYMA :( )

The flash hider will be able to be removed.

 

Buy a good battery and charger. Preferably a LiPo, and re-wire to Deans.

Share this post


Link to post
Share on other sites

I'm also 99% sure that the barrel is threaded (unlike TM-spec rifles like my CYMA :( )

 

 

 

This confuses me - my actual TM M4A1 has a threaded barrel. I have changed the flash hider to a Dytac QD one so I can use my tracer on it! Must be a CYMA thing rather than a TM thing?

Share this post


Link to post
Share on other sites

This confuses me - my actual TM M4A1 has a threaded barrel. I have changed the flash hider to a Dytac QD one so I can use my tracer on it! Must be a CYMA thing rather than a TM thing?

I guess so, I just assumed it could be a TM thing since CYMA make TM clones. Stupid that it doesn't have a threaded barrel but oh well.

Share this post


Link to post
Share on other sites

 

 

My Cyma M16A3 (CM009 as they call it) has a standard 14mm -ve thread . . . . . . . -_-

Share this post


Link to post
Share on other sites

Is it going to be LiPo ready? I don't want a shattered gearbox or stripped teeth, any idea of a C rating and voltage? Thanks

Only an 11.1V should be problem if your gun isn't upgraded but a 7.4 should be fine. Around 25C rating I believe is the optimum, 20C is a bit too low whereas 30 is quite high IIRC.

Share this post


Link to post
Share on other sites

Only an 11.1V should be problem if your gun isn't upgraded but a 7.4 should be fine. Around 25C rating I believe is the optimum, 20C is a bit too low whereas 30 is quite high IIRC.

Thanks bro,

Now about a motor for this bad boy, I would like a respectable ROF,and a semi-decent trigger response (assuming I correct AOE and go with Deans plugs), what motor should I get? Keeping cost low is ideal.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×