rossdzy Posted March 19, 2014 Share Posted March 19, 2014 Hey,im looking to upgrade the barrel in my G&P Sr 16 urx, barrel is 11.5 inch which is about 290mm. I cant seem to find one this length! Do i just go for a 300 mm one as it will be still inside the flash hider? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 19, 2014 Supporters Share Posted March 19, 2014 Madbull Python V2 comes in 285mm if you can find one, but you could always cut the longer one down with a hacksaw. Dress the end with a needle file and bob's your uncle. Link to comment Share on other sites More sharing options...
rossdzy Posted March 19, 2014 Author Share Posted March 19, 2014 Cheers ill go for the 300 one Link to comment Share on other sites More sharing options...
sunstar Posted April 1, 2014 Share Posted April 1, 2014 Why not get one "longer" and cut it to length ??? It's not realy that hard ... 1: A good metal saw to cut it, 2: Then a slightlly larger diameter (eg 8 mm) drill to give the ends a |\ /| end profile ... 3: a bit of high grain sand paper to ensure the end has no filings 4: Cleaning it with a cleaning rod and smooth paper :-) ;-) That's is ... so if you know your way around a tool box then just get a longer one and cut it to size .... Just make sure you test it by blowing a bb through the barrel before you install it .... (Just to make sure theres no metal dust left) Link to comment Share on other sites More sharing options...
kriegar Posted April 1, 2014 Share Posted April 1, 2014 or leave the length and add a suppressor? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.