Jump to content

TaiwanGun P&J BBs - Good enough for TBB?


Airsoft_Mr B
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

So I've heard TaiwanGun's own-brand BBs are actually pretty good?

Question is:

Are they high enough quality to be used in a sniper rifle / tight bore barrel?

 

I'm wondering because their pellets are very affordable and I was thinking of buying some bio pellets for my AEGs and some .3's for the sniper rifle(s) I will be getting.

I don't know what their tolerance is / how well polished they are etc because it's a good idea to use the best quality BBs in a sniper rifle (well really in any gun for that matter)

 

http://www.taiwangun.com/en/pellets-0-23g-3000-szt-premium-p-j?from=listing

http://www.taiwangun.com/en/pellets-0-30g-2000-szt-premium-p-j?from=listing

http://www.taiwangun.com/en/pellets-0-32g-2000pcs-in-bag-p-j?from=listing

 

Thanks,

J

 

 

Link to comment
Share on other sites

Ive personally fired over 5k .23 through my Cyma 039U AK with no issues at all.

 

Next sunday I will be using the .28 on my Cyma 032 M14 which has a tight bore in it.

 

 

I have been using their Bios, I have not seen any seams or deforms on any of them and I have .20, .23 and .28 here.

Link to comment
Share on other sites

I did try the .25s with a madbull 6.03 and I did have a lot of feeding issues though it could be my mags wrapping their tits in as they are old. My mate who has a stock G&G R8 L used them all day with no dramas. Best of getting one bag to test with and compare with a brand you know does feed.

Link to comment
Share on other sites

  • Supporters

I've fired about a hundred P&J 0.32g's through my SVD with a 590x6.01mm TBB - no issues, blockages, or anything annoying. Performance wise I'd say about on a par with KA 0.3g's - ie a whisker worse than Blaster Devil 0.3g, better than Blaster 0.25g's (for range, can't be sure about accuracy).

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...