Jump to content

DTW BODY WOBBLE


Qlimax
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

  • Supporters

Hi all

 

Just wanted to see if anyone else has had is problem. My DTW wobbles at the front connecting pin for the upper and lower receivers which when firing makes it smash BBs inside the hop. If you have had this problem what did you do to correct it without changing body parts as that's the obvious easy fixs.

 

Thanks

Link to comment
Share on other sites

  • Supporters

Look at an ra-tech magic receiver pin or similar, or alternatively you could try an accu-wedge.

If you're on a budget, put an o-ring around the bit that sticks out on the upper receiver that has the receiver pin hole on it

IMG_6251.jpg

Link to comment
Share on other sites

  • Supporters

Look at an ra-tech magic receiver pin or similar, or alternatively you could try an accu-wedge.

If you're on a budget, put an o-ring around the bit that sticks out on the upper receiver that has the receiver pin hole on it

IMG_6251.jpg

Just bought a Ra-tech magic pin and have done a temp fix until it arrives to stop the wobble but it is still smashing BBs think he buffer spacer needs to be shimmed properly

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...