Jump to content

NEED HELP!


Oshia
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Desperately looking for a 1/4" riser to align my Eotech 3x FTS magnifier and Eotech 552 clones.
The magnifier is just a little too high, and its p*****g me off every time I use it, it is functional but still very irritating.
Now I've found the LaRue LT110 but those buggers are pricey and I'm on a budget.
If anybody can point me towards a 1/4" weaver riser, I'll buy you a pint.

Link to comment
Share on other sites

Oooooh- you want a QD mount? You should have said!! :D

What he said!! One of them.

Link to comment
Share on other sites

  • Supporters

http://ant-supplies.co.uk/Pages/RailsAndAdapters.aspx these guys are pretty good, postage is included in the price and they still beat most people. Unfortunately they either have 1/2 inch, 3/4 inch or 1 inch. But if it is all a little low you could boost the lot to get the right height.

Link to comment
Share on other sites

  • Supporters

I think you'll be very lucky to find one that is 1/4 inch, they tend to be thicker than that simply to accommodate the bits and pieces of the workings.

Link to comment
Share on other sites

Have you tried moving the sight further forward so it's less noticable?

Link to comment
Share on other sites

I found one, but its £30, a little excessive I think but I recon I'm gonna have to bite the bullet and order it.

http://www.ebay.co.uk/itm/300965690225?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...