Jump to content

G&g cm16 upgrades


Passey
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Ive played a few games with my g&g and am after a bit more power and accuracy but as cheap upgrades as in the future im going to be getting a better gun.

 

I was thinking a 6.03 tightbore barrel and a shs metal hop-up for m16/4.

 

Would both of these work on my gun and be fairly simple yo fit?

Link to comment
Share on other sites

A new hop-up sounds like a good idea. But there's no point upgrading the inner barrel to a 6.03. Most G&G's come with a 6.04 so there won't be any real noticeable difference

Link to comment
Share on other sites

  • Supporters

I am lead to believe they do, but I have not measured it myself.

 

From my perspective (I have the cm16 raider l)

Mine already has a hell of a range, and is very accurate in my opinion, then again I did put some 3000 - 5000 bb's through my gun before I set my hop, ATM I can out range most ppl.

As for performance mine has chrono'ed at 330,350,320 in the past so I am content ( be aware most sites state a 350fps for AEG's, or 400fps for electric sniper guns locked to semi)

 

 

What would I change maybe a faster motor, but I am gunna lipo it once the warranty has expired, then see how I feel.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...