Jump to content

Archived

This topic is now archived and is closed to further replies.

THE FNG

KS/JG P90 won't fire

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Recommended Posts

When I pull the trigger on my KS/JG P90, there is no response at all. A quick look at the motor; there is still no response when the trigger connectors connect, and I have tried this with several batteries to no avail. I've ran less than 200 rounds through the gun itself and have only had it for a few weeks.

Does anybody own one or had any experience with this at all?

 

Thanks in advance

Share this post


Link to post
Share on other sites

try checking the fuse, and the soldering points, otherwise come back.

Share this post


Link to post
Share on other sites

i had one in which if a certain person who used it when i wasn't around would pull the wire out of the Tamiya, Fix = Slide it back in and when Poss Trade for Dean's

Share this post


Link to post
Share on other sites

Tried the fuse, wiring and solder points: all fine.

I have found the problem however; the tamiya connector prong had come loose! luckily I have spares and fitted one straight away and it fires perfectly again.

 

Really sorry for bringing up such a trivial issue, but thanks for the quick replies.

Share this post


Link to post
Share on other sites

×
×
  • Create New...