Jump to content

Archived

This topic is now archived and is closed to further replies.

adam bussey

trying to find things cheap or well priced for the quality

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Recommended Posts

right here are some things i am after:

TBB for my src G36kv

foregrip

g36 midcaps

silencer

Share this post


Link to post
Share on other sites

*Suppressor no such thing as a Silencer ;) and what Length/Type

 

Do you mean a Vertical Grip or a New Handgaurd?

 

How long is your Barrel?

Share this post


Link to post
Share on other sites

g36c has a 250mm inner barrel, give or take a couple of mm

madbull version 2 is a great buy at £35, or a cheaper lonex type would be a good bet as well

 

http://www.actionhobbies.co.uk/Madbull-Black-Python-Ver-2-6-03mm-Tight-Bore-Barrel-247mm_AMDX2.aspx#.UY2KxsrGcto

http://www.actionhobbies.co.uk/Deep-Fire-6-02mm-SS-Tight-bore-Barrel-247mm_AY7SI.aspx#.UY2LEcrGcto

 

foregrips

http://www.actionhobbies.co.uk/Hand-Grips-RIS-RAS-Fitting_B23CF7.aspx or about £5-8 on ebay, if you can wait for postage from HK

 

for mags, most recommend MAG midcaps, you just need to find them in stock somewhere

 

Supressor, well it depends upon how big you want to go and what style, as plain ones tend to be cheaper then dimpled patterned ones, and the longer you go the more it costs.

Share this post


Link to post
Share on other sites

g36c has a 250mm inner barrel, give or take a couple of mm

madbull version 2 is a great buy at £35, or a cheaper lonex type would be a good bet as well

well i did say it was a G36K

Share this post


Link to post
Share on other sites

"thanks for that information, and taking the time out to actually do something rather than letting me google crap myself, as I can't be arsed to actually do my own research"

 

no don't worry about it...feel free to go play with yourself.

Share this post


Link to post
Share on other sites

"thanks for that information, and taking the time out to actually do something rather than letting me google crap myself, as I can't be arsed to actually do my own research"

 

no don't worry about it...feel free to go play with yourself.

sorry for pointing out that you did not read the OP properly, anyway i have been looking and have found one to fit

Share this post


Link to post
Share on other sites

He was trying to help you with a simple task, he may have simply misread it.

Could've at the very least said thank you.

Share this post


Link to post
Share on other sites

He was trying to help you with a simple task, he may have simply misread it.

Could've at the very least said thank you.

yes I know and I am sorry about my raver rude replies, I was having an off day.

Share this post


Link to post
Share on other sites

www.google.co.uk

 

www.ebay.co.uk

 

Quite simple really.

Share this post


Link to post
Share on other sites

Do you want to use the suppressor to cover a longer internal barrel?

 

That's what I did - 509mm inside a Guarder OPS US Socom Silencer (460mm x 40mm) and a Madbull CCW to CCW 1" extension, but my inner barrel is a Tanio Koba Hop Twist - I need to complete my rebuild before I can tell how well it's performing, but I'm very happy with the quality of the suppressor.

 

I can say with conviction that replacing the stock inner barrel with a 455mm CYMA AK barrel improved the range and accuracy noticeably. Also, 40mm is the widest suppressor that fits into a G36 RIS and it is a squeeze into mine which scratches the suppressor - if that bothers you, you'd best apply a bit of tape to the bits where it catches and grease them before taking the RIS off with the suppressor in situ.

 

I think my 5KU open ali foregrip looks the dogs, but it seems not many people agree. It's not particularly comfortable to hold though and is a fraction too short for my liking too. I'm thinking of getting one of those grip-pod thingies that split in two; lol that sounds about as much use as a chocolate teapot! I mean these:

10520-thickbox.jpg

 

D-Boys G36 Mid Caps are advertised as holding 50 BB's but actually hold 28-30. The reason I bought them is because they're the translucent type with fake bullets inside and the alternative bullet mags seemed too expensive at the time for me to buy 6. I bought 5 Classic Army 50rnd bullet-mags 2nd hand and they're mainly good. It's just the lugs for clamping mags together that are sh!t - they are made with a plastic rivet type thing which fits into a collared hole on the side of the mag (I expect they thought this was a good idea because those lugs get broken fairly often so a rivet could be replaced). A lot of them had already fallen out when I got mine and two more fell out when I investigated how tight they were, so now I've super-glued 'em, which of course means that if they get broken it'll be a right ball ache to replace 'em, if CA even do sell them separately...

Share this post


Link to post
Share on other sites

Do you want to use the suppressor to cover a longer internal barrel?

 

That's what I did - 509mm inside a Guarder OPS US Socom Silencer (460mm x 40mm) and a Madbull CCW to CCW 1" extension, but my inner barrel is a Tanio Koba Hop Twist - I need to complete my rebuild before I can tell how well it's performing, but I'm very happy with the quality of the suppressor.

 

I can say with conviction that replacing the stock inner barrel with a 455mm CYMA AK barrel improved the range and accuracy noticeably. Also, 40mm is the widest suppressor that fits into a G36 RIS and it is a squeeze into mine which scratches the suppressor - if that bothers you, you'd best apply a bit of tape to the bits where it catches and grease them before taking the RIS off with the suppressor in situ.

 

I think my 5KU open ali foregrip looks the dogs, but it seems not many people agree. It's not particularly comfortable to hold though and is a fraction too short for my liking too. I'm thinking of getting one of those grip-pod thingies that split in two; lol that sounds about as much use as a chocolate teapot! I mean these:

10520-thickbox.jpg

 

D-Boys G36 Mid Caps are advertised as holding 50 BB's but actually hold 28-30. The reason I bought them is because they're the translucent type with fake bullets inside and the alternative bullet mags seemed too expensive at the time for me to buy 6. I bought 5 Classic Army 50rnd bullet-mags 2nd hand and they're mainly good. It's just the lugs for clamping mags together that are sh!t - they are made with a plastic rivet type thing which fits into a collared hole on the side of the mag (I expect they thought this was a good idea because those lugs get broken fairly often so a rivet could be replaced). A lot of them had already fallen out when I got mine and two more fell out when I investigated how tight they were, so now I've super-glued 'em, which of course means that if they get broken it'll be a right ball ache to replace 'em, if CA even do sell them separately...

oh right didn't get what you meant!

Share this post


Link to post
Share on other sites

oh right didn't get what you meant!

In what bit/what way?

Share this post


Link to post
Share on other sites

In what bit/what way?

first time round if you're just reiterating what you said earlier

Share this post


Link to post
Share on other sites

You know that thing where people display their exasperation by putting 2 fingers up to their head and pretend to shoot themselves in the head?

 

I just did that reading this.

Share this post


Link to post
Share on other sites

as in i get what you mean now!

Share this post


Link to post
Share on other sites

if its the proper SRC G36KV (not G36C made to look like a KV) then any silencer will do its personal choice as long as it's 14mm CCW, as for a foregrip any again is personal choice with that, go for something that fits your hand, the grippod above is very big as I have one ( I have large hands and it's still chunky in my hand) as for mid caps look on ebay lots of g36 stuff or mayby try some of the far eastern airsoft sites all good prices just have to wait a little longer that's all

Share this post


Link to post
Share on other sites

post-4404-0-42187800-1368748885_thumb.jpg

 

a pic of gripod on other pictures of it are the guides thread

Share this post


Link to post
Share on other sites

if its the proper SRC G36KV (not G36C made to look like a KV) then any silencer will do its personal choice as long as it's 14mm CCW, as for a foregrip any again is personal choice with that, go for something that fits your hand, the grippod above is very big as I have one ( I have large hands and it's still chunky in my hand) as for mid caps look on ebay lots of g36 stuff or mayby try some of the far eastern airsoft sites all good prices just have to wait a little longer that's all

thanks

Share this post


Link to post
Share on other sites

×
×
  • Create New...