Supporters Qlimax Posted March 28, 2013 Supporters Share Posted March 28, 2013 Hi, I've changed the gear box in my M4 but now cannot get the motor connectors to stay on, ive tried crimping them together to get a better connection but the positive one keeps coming off. Any Ideas anybody ??? Thanks Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 28, 2013 Author Supporters Share Posted March 28, 2013 Eyelet connectors.... Link to comment Share on other sites More sharing options...
RR01 Posted March 28, 2013 Share Posted March 28, 2013 Try some of these: http://www.airsoftworld.net/modify-motor-connector-plug-set.html Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 28, 2013 Author Supporters Share Posted March 28, 2013 Yeah seen those They look alright Thanks Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 29, 2013 Author Supporters Share Posted March 29, 2013 Resolved took the plastic off the eyelet bar the back to stop metal on metal touching, crimped, soldered, stripped the wiring and soldared that as well. Working perfect Tools needed. Soldaring iron Crocodile pliers Eyelet connectors Wire cutters Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 29, 2013 Author Supporters Share Posted March 29, 2013 take it back not resolved. When the motor is connected to the gear box it only does two or three shots then cuts off, take the motor off the box and the motor runs perfectly Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.