Jump to content

Archived

This topic is now archived and is closed to further replies.

rschris

M4 CQB - Following the change

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Recommended Posts

So a few of you may know my G36C and the fact I have pretty much topped out anything I can do to it.

Suffice to say I have had nothing to waste my money on so started a new project.

1 x Classic Army M4 CQB

Out of the box it has fantastic trigger response and the groupings are very close on full auto.

FPS = 337 standard.


So I have ordered a few bits but this is the gun in its primary state:-

aeg_ca_cqbsl_zps95836856.jpg


---------------------------------------------------------------------------------------------------------------------------------------


So first of all I dont like the stock tube all being black so now its got to be changed

Tools used:-

Fine grade Wet and Dry Sand Paper
Autosol
3 x poloshing cloths
1 x toilet roll

In its primary colour with a tiny bit of paints lifted
image_1361130443837641_zpseb54e84a.jpg

Finished 1 side and no major scoring just light scratches from sandpaper and dullness.
image_1361130469873887_zpsfb0620dc.jpg

Time to apply the Autosol
image_1361130489130447_zps515704b2.jpg

All finished with autosol
image_1361130503562341_zps5ea381d5.jpg

Gun with stock back on
image_1361130519784283_zps30664425.jpg

Stock on and full length extension
image_1361130539924486_zps072972e3.jpg

--------------------------------------------------------------------------------------------------------------------------------------------------

17/2/2013

Madbull 6.03mm tightbore barrel fitted

FPS = TBC



-------------------------------------------------------------------------------------------------------------------------------------------------------

 

OK, arrived home today to find my bits had arrived so on they went.

 

First of all the front triangular sight had to go - this was obstructive but also needed so this was the perfect option - front folding sight

 

226884_10152577420870626_2043445877_n_zp
542759_10152577420700626_923182734_n_zps
563008_10152577420615626_228480697_n_zps

 

 

 

 

Next was the front handguard - getting away from the usual RIS setup people have I decided to go a little bit different. Inbuilt torch handguard

 

734933_10152577391350626_1727288717_n_zp

 

 

 

So finally addition of SAS rear stock and the addition of the 551 eotech with kill flash lens cover.

 

18225_10152577390350626_956809943_n_zps2
19819_10152577385075626_434515772_n_zps5
58426_10152577391210626_1012697387_n_zps
480874_10152577390820626_1001092647_n_zp
485140_10152577422975626_1230134121_n_zp

 

 

------------------------------------------------------------------------------------

 

 

So had a test at JD today

 

Firing 345fps with great grouping and while I was there got a few more bits put on.

 

image_1361469639433979_zps81814e94.jpg

Share this post


Link to post
Share on other sites

So you've done the one thing that most systema owners hate about their guns :P

Share this post


Link to post
Share on other sites

I have haha.

 

Personally prefer the break up of the black by doing this,

Share this post


Link to post
Share on other sites

updated with all bits added.

Share this post


Link to post
Share on other sites

I hate the buffer tube on Systemas, but knowing that you've gone to the effort of doing it yourself, I think it actually looks pretty good. Weirdly lol.

 

I think it looks great. Makes me want an M4 again for my up and coming CQB loadout.

Share this post


Link to post
Share on other sites

Thanks for that ED. Ye the buffer tube was a tough one....I looked at the ones with silver tubes and thought they look so nice....everyone has a black tube....I dont want it to be mistaken for a systema, I like the look of it and is a bit different.

 

The bits are the general assortment of try and test. Fingers crossed ive just managed to pull it off....looks alot better in the flesh than the pictures.

Share this post


Link to post
Share on other sites

I'd do the Barrel Aswell Personally. But i Like the Look so Far! I Got a General Build that's doing the same but the A Frame Front sight has to stay my particular Rendition!

Share this post


Link to post
Share on other sites

updated

Share this post


Link to post
Share on other sites

That looks awesome mate, I really like the buffer tube personally.

 

Out of interest, where did you get this gun from? My mate was looking for one a while back and it was out of stock haha.

Share this post


Link to post
Share on other sites

Hi Rez, it was at JDairsoft in cannock.

 

£169.99

Share this post


Link to post
Share on other sites

Don't suppose you'll be at The Stan on Sunday, Chris? I might be there with a few of the guys from my Uni group.

Share this post


Link to post
Share on other sites

Hi ed, Unfortunately im at matlock games on saturday ed.

 

Be at the stan in the near future.

Share this post


Link to post
Share on other sites

×
×
  • Create New...