Searley Posted December 25, 2012 Share Posted December 25, 2012 Hi all, completely new to Airsoft and just got a Pro-Tronik battery charger for Christmas along with two 1600mAh 1.2v batteries for my G&G UMG. The charger is a little confusing, not only are the instructions in french however there are various options on it like a dial from 500mA-1000mA and another dial labelled "Elements" with the numbers 2 through to 10 on it? Can anybody shed any light on this for me as I was hoping to have a shot or two later on! Thanks a lot! Link to comment Share on other sites More sharing options...
Supporters Richard65 Posted December 25, 2012 Supporters Share Posted December 25, 2012 Did a google search and found these instructions in English so they may help if they are for your charger:- http://www.a2pro-online.com/media/manuals/electronics/7706-AP6blc-english.pdf Are you sure your batteries are only 1.2v? I would have expected them to be 8.4v Ni-Mh or possibly 9.6v. Check out the `guides' section of the forum as there is a section on battery charge times. I would use the lower 500ma setting for 1600 mAh batteries. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.