Search results for query: *

@Davegolf and @AK47frizzle quick update. I took off the teeth as you suggested. And I reshimmed as AK suggested and put the m120 spring back in the gun and chrono'd. I got 305FPS on original barrel and was happy with that. I did a ROF test and got 26RPS which I'm still a bit bleak about.  Good...

@AK47frizzle thank your for your input! It's my first ever attempt at a moderate speed SSG build and I guess i'v over read forum posts and have got myself confused on what I think is right. @Davegolf has given me some awesome advise so far and it's been so welcoming in the process as every...

I haven't done that, as I read many posts that stated its not necessary. I will however remove 2 teeth this weekend. Suppose it will aid a tiny bit with weight reduction. Once I have tested the boost motor. (maybe tonight if I get a gap) I'll post my results:) 

As I said I dropped the m130 in because of the PME that stripped my bevel gear. I also stated I dont mind loosing FPS to get my speed up as I was bleak at getting 25RPS due to the m130. So my question is more aimed at getting my RPS closer to 30 and if it means a loss in FPS I'm happy with...

@Davegolf Apologies for the delayed reply, been a busy few days! Okay I have another update, so although I managed to get the gun firing at the above stated FPS, when I did the RPS chrono guess what? it gave me a reading of 27.2RPS and then I heard a horrible noise:( Stripped the box down...

Okay another update, I decided to try the stock tappet plate from another one of my G&G gun and i built it back up. My FPS jumped to 365FPS with a 4-5FPS variance between shots. I compared the two tappets and noticed the  the SHS fin was much wider and wasn't allowing the tappet to fully...

@Davegolf thank you so much for your informative response! I opened the box up tonight and went thought it as you explained.  1. I picked up a small airleak when testing the compression between piston to cylinder that I wasn't happy about. I changed the G&G piston head out for another that...

Hi guys! So it took alot longer to get the parts I required to finish this build and some parts have changed. I have put the build together but am experiencing issues. I'll list my current parts and explain what I'm facing and hope you guys can point me in the right direction!  My build is as...

I'm sure I could get one in definetly but it's the price that goes crazy.  Currently 1 pound translates to R18.23 South African Rands. So the bad exchange, coupled with import duties and shipping make it exorbitant. The cheapest way is to get it via US or asia when someone visits. But that's...

This is awesome information! Thank you so much for sharing this! So jealous! Wish we could get gate's here! Those g&g green buckings are so good. I thought it did better than the prommy purple I used to have. I'm now using maple leaf blue 70D bucking and omega nub. Very happy with the set...

I very much appreciate your input! Thank you so much! I forgot to also mention the build will go into an ARP556 with a barrel length of 130mm if I'm not mistaken so FPS may be a little lower Than what you have quoted but non the less I understand what is required.  In your opinion, should I put...

@AsomodaiSorry for the late reply. My local fields are 400FPS limits, so long as I'm under that I'll be fine. The reason for choosing an m120 was so that I could avoid PME. People have told me that on 13:1 gears and a 16-18TPA motor I should get around 35RPS and be at the cusp of PME so I have...

Hey guys! So I managed to get a G&g shell and some parts for next to nothing and have decided to do an SSG build with 13:1 ratio gears. I have scoured the internet but there has been so many contradictory things said So I am looking for some advice on what to except and what to look out...