Search results for query: *

Krylon Ultra flat Matt paint works the best  in my experience. I'd do a few layers(2-3) for your base color, and then stencil with the secondary colors after that as you see fit. It will need a touch up from time to time as it will wear, but as that is what you are going for that shouldn't be a...

So we are referring to the internals of the gun. For the externals, do whatever your heart desires, that is one reason for so many pages. Most of the issues are caused by mixing and matching parts. QC is something TM has down pat, and when you mix that with drivetrain components that are not to...

I'll be honest I'm terrified to take that thing apart...It runs smooth enough for me though.

For the love of Baby Jesus, we just need to pin this at the top of each page. Keep the gun as stock as possible with exception to the nozzle return spring. Heavy BBs? Change the nub. Need more FPS? Longer barrel or NPAS. Mags? I've got four that I bought with mine and they just keep running and...

Use the Dave's Super nub and the stock bucking. In this video I was using the AA nub and stock bucking and have since switched to the metal Dave's nub, and its more consistent. Using heavy BB's will help you see the best gain in accuracy.

SixG Nub, stock bucking until it wears out. Upgrade nozzle return spring to 150%, and use a 370mm barrel, and .4-.45's. You will be grinning as I do at every skirmish. 

It was just an idea! Haha more just wishful thinking that TM would make a gas bolt gun, they have a great base and it would be super easy.

Aright Alright I'll let this one be put to bed. No MWS was harmed in the discussion of the abominations mentioned above ?

I have a springer, for context I used to run Tanakas but never really enjoyed the consistency. I'm super impressed with the MWS, I honestly just wish TM would make a bolt gun that uses the same mags or something similar, they would sell like hot cakes.

Alright guys, now bear with me. I promise I have a good reason for asking this. Lets say I really enjoy the consistency of the MWS. Lets say I normally use a bolt gun at the skirmish for sniping. I really like the ergonomics of my MWS setup, and was curious if there was a way to install a...

What @davegolf said. Only thing I'd add to your list is a spare nozzle return spring, 150% if you can find one. Don't change anything else other than what you listed above, and honestly I love my tan modify but you could run the stock bucking for ages before it wears out(Mine lasted 10K rounds...

I like the original bucking, just had some issues in the colder weather with accuracy. Several thousand rounds in on the Modify tan and its working well for now- I've also got a handguard that allows for removal and hop/barrel swap in under 3 minutes so swapping a bucking isn't the worst thing...

Can you give an approximate round count?

I fully concur and can confirm this. Seriously, I have had ZERO issues with leaks and I almost exclusively run propane. Drop of oil every month or two for the mags, keep the piston cup lubed and you are golden. On a side note Dave, I ordered a tan modify bucking and I am having great results...

You nailed it dude. Only thing is have a 150% nozzle spring on hand and you are set, match barrel length to fps desires and go... I've tested a lot of aftermarket stuff and the HSB and Nub is pretty much all that I have kept. I have spare marui hopup rubbers on hand and some spare TM nozzles as...

Which black npas are you using? RA Tech or...?

Do you use the metal C clip? I'll double check it, but it seemed fine when I inspected it. Cheap enough to justify another order for a 60D as I am using mine in a DMR. EDIT: Removed the C clip, gave it a shot- much more consistent. I still get the odd flier, but that may just be because I...

So I tried this with my laylax barrel and it gave abysmal results- even after adjusting the side fin to fit in the hop unit. Do you have to use with one of their barrels?

Since people are talking about upgrades, I have to report that my hao industries bolt that I had set up for ultralight use actually works worse that the stock bolt in the cold. Like way worse ? Now I'm back to my only upgrades being Daves nub and HSB, a 150% spring, and a laylax 370mm inner...

What do you do to keep your mags warm in game? I've noticed that my gun runs fine in cold but if the mags sit out for a while it it cycles slower, even on the light bolt- after leaving the mags in a warm pocket for ten minutes or so its back to normal. Running propane in 50 degrees F.