Search results

I’ve been using the smaller marui loader with success. It’s been the most reliable on the Marui mags. I have 3 Prowin mags, and several different speedloaders work pretty well with them. The Marui mags are more temperamental. Here’s a link to the Marui loader I’m talking about.

I’ve had the chance to use the Modify X-range in a few games now. It’s held up fine over the 4 or 5 hundred bbs I’ve put through it. I’ve just started using .36’s (up from the .30’s I was using) at about 2 joules and that’s working really nicely with the bucking. One thing I’m noticing as maybe...

Looks normal to me, too. Also, anywhere you see wear like that is a great place to work in some good grease. I like grease that ends up dry so it doesn’t attract dirt. 

Sorry to hear LVOA-D is leaving. I’m jealous of this kit! I love working on GBBs, and you’re right that putting one together like this will help learn the system. Have fun!

I have an update on the new Modify X Range buckings. I received the two I ordered (both 65 degree) and installed one on my MTR16. I have a PDI barrel and an Angry Gun NPAS nozzle in it (not the full AG bolt carrier though). I took some shots at about 1.5 joules with .30g bbs. The bucking is...

AG is based in Hong Kong, so it could be held up at that end. If it’s already left China, is it possible that it’s being delayed in Customs? I’m in the US, and that sometimes happens here. 

I ordered a nub from Dave and received it. He even followed up in mid-October to make sure everything was good. (It is. The nub is a simple upgrade, well-machined, and works great.) Dave - I hope everything is ok man! A GBB will vary FPS depending on temp. An NPAS or the Angry Gun nozzle are...

Wow! That's impressive. Couple questions: For comparison, what sort of consistency were you getting with the stock nozzle? How long are you pausing between shots? And, do you mean that all of your shots are at (say) 300 + or - 1fps, or that you're consistently losing 1 fps per shot (so, 10 shots...

Gotta second the prommy barrel. It’s pricey, but if you’ve already bought into the MWS maybe you’re up for that. 

Dave has a smart suggestion there. I just got the armorer’s wrench in place and tapped it with a brass hammer until it started to move. I managed to mar the soft aluminum of the barrel nut that way but it did come off.

I used vice grips to hold it while I punched out the pin, but really any decent clamp will do. Just make sure to use a rag or something between the clamp and the nozzle piece to prevent damage.

Quick tip for those who don’t already know. You can get YouTube to translate videos like that MWS takedown one into English. I think you need to be on a computer - at least it doesn’t work on my iphone. Go to settings and turn on captions in Chinese (or whatever language). Then go back in to...