Search results

They are, I believe aside from a different sized top section, they are identical internally. Well that and the external pretty bits.

Oh I could be wrong then! I was always under the impression SWAT owned the design and there was just a big stock left over to sell.

I have one 10 minutes form my work, wander in, fill up 2 48ci tanks and I'm gone pretty quick haha. I only use HPA for GBBR's and pistols so I'm not pumping out 1000's of rounds, enough to warrant a scuba to fill me up during the day. I would suggest play a few games and see what air you're...

Very true, some dive shops don't like HPA tanks, the one's that fill from large tanks probably won't, but those with compressors should be fine.. Worst case, buy a scuba tank and get that filled no problems.

Dive shops and some paintball sites if you didn't already know. You'll need a fill station if it didn't come with one also.

I have my guns on my wall at the end of my bed :)  

The Dynatex is discontinued, the design was bought by SWAT and rejigged (slightly). So essentially the SWAT VTG should be better with less issues down the line. However as you say a lot of places still stock a Dynatex, and SWAT have periodical outages of stock to make the VTG. If you want the...

Yes! Been working on my Hicap all morning haha

1 BB with the Stock hammer spring (the one in the grip) should act like a 120% which is perfect. The 150% may be a little strong for green gas but should still work. The BBU always hits parts of the frame, which is why you take it apart entirely (all the slide parts), then try doing it...

Probably the 150% spring combo, you don't need more than a 120% hammer spring unless you live in very hot countries. Make sure the slide has little to no friction against the frame also (best check is remove all slide parts and slowly rack by hand). The stronger the recoil spring the quicker...

2 HPA tanks, 2 regulators and 3 lines, 1 setup for running  dual line. Planning to run with PTS MKM GBBR  &  TM Hi-Capa, maybe pics to follow... ;)

Not sure about the nozzle but if you use a weak/stock nozzle with a 140% recoil spring it can shatter the nozzle quick. Perhaps the same can be said (however slower over time) for a 180% nozzle return spring? - Could be a worth a test :P

Oh no it is a new chamber, it shoots pretty consistent and fairly accurate at about 40m which is more than I need it to do.

I may have the fix and I'm kicking myself over it... But first, yes the mags do have a slight movement up and down but do not cause much of an issue now - how can I fix this? The fix: The hop unit installed has a slight amount of hop at all times even at 0% position, and being a CQB player...

Unknown as the gun with it's upgrades are second hand. However from what I can gather the hop unit adjustment teeth are shiny silver metal which would indicate it is not stock, a new inner tight bore barrel so I assume a new rubber too.  

ASG Blaster 0.25g WE Green gas Nuprol 2.0 Green Gas Various propane cans (Tried 2 brand new green gas cans in case the pressure had dropped too low).

Hi All, Had my PTS MKM a little while now, loving it, but on some mags it has the tendency to jam now and then due to a double/bad feed. - which would cause the next shot to vent the gas. I have been through top to bottom of the mags, the trigger and all associated parts, the bolt and nozzle...

Anyone know where I can get a steel buffer lock for a PTS MKM (KWA LM4)? Mine's so worn it works 10% of the time.

Yeah I got chatting with AirsoftEngenuity and it sounds like a solid design. Very similar to the VSR10 one by classic army. The guy selling his gun to me mentione da tightbore barrel but I have no idea if that's an upgrade or the stock 6.05mm one he's on about.