Search results

https://airlab.parts/collections/hop-up/products/prometheus-soft-black-straight-bucking-for-r-hop-flat-hop Nope, black apparently

Just to add to this, barrel diameter mainly affects fps and not so much accuracy. Just look at bore quality for accuracy improvements. Prometheus is good, lonex is alright, PDI is pretty much top dog and ORGA barrels are also regarded as very good indeed. Madbull's are good for a very good...

For a flat hop, as long as the bucking isn't total sh*t and seals, it doesn't matter too much. I think the G&P buckings are shite and I've had two of them come in stock G&P's with a dodgy cut end and bad seal.  G&G green is just a go to standard good ol' bucking. There is a prommy...

Make sure to check your compression as AEG's that have been stored away for a long time usually suffer from crap air seal due to o-rings crapping out and the lube can dry up.

You SS'ed the piston instead of the gears? I'm confused, don't you have to SS the gears as well if you SS the piston?

1amp 2c lipo? You mean 20C right? Maybe I'm missing something here but that battery could light maybe a small bulb but not an airsoft gun.. If you fully discharged your lipo and charged it again, it is probably dead and could of been very dangerous but it's still a 8 volts? You did say you...

Oh and there are plenty of good motors on the market but here are a couple of well known good ones that would be good for your build: ASG 30k Lonex A2 SHS High Torque ZCI High Torque 22TPA (I would say this one might be best because of the higher TPA but at the same time it isn't too high...

SHS 13:1 are fine...heard some hit and miss things with the 12:1's and it's really not worth the hassle over 1 advertised rotation anyway. If you are talking about doing a full revamp to keep the gun reliable and also talking about high speed gears like the 13:1, there is a whole lot more that...

Could always glue it to the hop up arm but the eraser mod is a very good, cost effective mod that is piss easy to do.

The bottom of the barrel should have a guide rail that the bucking slides into to put the mound directly over the barrel window.. So when you slide the bucking onto the barrel it lines up right? Well on the bottom of the hop up near the C-clip there is usually a faint line that you line the...

A bit of adhesive veclro found online for a couple of quid at the back of the magwell pushes the mag forward into the hop up nicely for most. You could also try a different hop up unit. No idea if compatibile but the lonex hop ups have a slightly longer feeding tube. Fixed my feeding issues...

I'm pretty sure this exact question was answered either this week or last week but...... Krytac is good as it comes internally all in all and requires minimal to no upgrades "unless you are picky as f*ck like myself" ASG cz805 has had good things said about it. Nice looking and different and I...

I had the Gate Merf 3.2 for quite a while but that bastarding signal wire connector that went into the mosfet was crap and died on me constantly so I decided to get a trigger board hence the Titan but I feel it's good enough to stand up to the BTC from the price that it asks for. I like it...

Is there any benefit of the chimera over the Spectre. Further more the BTC parts over the Gate Titan. Interested to know That gun case is actually supposed to be fairly decent even if it is made by a fairly crappish company so you got a good find there

Ordered and done...he accidently ordered the standard black nub but it won't realy mattter too much. He is using 0.28 at around 330fps on a 0.2 so soft would maybe be better but I went from a soft nub to a hard nub on the prommy's and the difference was actually hard to tell at all. I think the...

I'm going in for the kill First time I've seen it in stock :o

Yeah I tried to find a Namazu for him but everywhere keeps selling out, those things sell fast...because they work. Never tried one though and only used the prommy flat nubs but the prommy's are pretty good in my experience. You can SERIOUSLY tell the difference between stock bucking and nub and...

Funny you say that as it's exactly what I said to him but he doesn't want to spend out the extra money. He said and his words..."I don't care if it breaks as if it does, I'll just HPA it or buy a DSG lower from Umbrella Armouries."  If he doesn't really care then on his head be it. I'm bored of...

Found the problem... the air nozzle has no o-ring so that is where the air is leaking. Saw some other people doing an internal review detect the problem and it lines up with mine. GOnna do as you said still to check the other parts but order a new lonex air nozzle anyway. Much appreciated guys.