Wo1f

Curse this thread! 😂
 
Slowly making my way through it, as I type this. Its a gold mine of great information which has already answered many of my questions!
 
I think a TM M4 MWS CQBR will be my next purchase...

Team MWS ready for tomorrow. The DMR being VERY special.. but more on that tomorrow night. 385fps on a .20, so there’s more to be squeezed out of it in terms of power.

Take the nozzle out of the BCG, clean out the insides and wipe it down with silicone oil and a little bit on the piston cup/sealing thingy. Over time it can get a little dry and hurt consistency  

Before you change anything, chrono it on .30’s and get a baseline for joules. The SixG nub and modify tan works well at any FPS. I’ve ran it in my 310fps CASV and in a 400 FPS DMR with great success. 

Haven't bought, but want to..
 
This hilariously massive flash hider 😂
 
https://www.octagonairsoft.com/product-page/flintlock-workshop-extra-big-m4-flash-hider
 

Do it!
 
visual representation of using an mws is game:

+1 for TNT. Contacted them as they don't do barrel lengths shorter than 320mm and they sent me out a 250mm S+ barrel same day.

For those having issues getting their long contact patch type bucking (TNT or ML), flat or concave nubs (Prommy, ML Omega, etc) seated proper in certain barrels, consider the following. 
 
From my experience, [pictured above] TNT and ML barrel have a longer hop opening or window. Allowing for the use of many of the longer type nubs available. Also note TNT is bridged at the rear. 
 
However, [pictured below] TM, ORGA, Prommy, etc mimic the stock size normal window size. PDI uses an even smaller hop window. Thus, flat and concave nubs have to be cut to fit. With less contact patch affect.
Although some say smaller windows have better seal, better efficiency, but let's keep this on compatibility issues cause we all want to blast 46g out as far as possible. 
 
So the consideration of barrel + nub + bucking combo is critical and also if your barrel is the stock type window, is the small gain in contact a benefit to you. As someone already pointed out the cylindrical type nubs are good up to and sometimes beyond 32/36g bbs, and have less margin of error when installing and performing, as well very consistent shot to shot (more on this later). 
 
Also in the mix, keep in mind your barrel length and bore diameter, as it plays a role in fps and a factor in the resulting range. 
 
Photo 1: TM barrel with ML Omega nub, although it looks as if it will fit, there is not enough space left for the bucking between the barrel window and nub. 
Photo 2, TM barrel + ML Omega, picture does not show well, once the bucking is installed front of the nub gets hung up on the barrel and will become slanted. 
 
Always try your new barrel + nub + bucking before installing into the upper as this will be hard to catch afterwards. 
 
Photo 3: TM barrel with ML Omega cut to size 
Photo 4: test, stays flat with consistent pressure 
 
I will say this is enough to lift and over hop 46g easy and due to the longer contact patch it starts to become difficult to control and maintain consistency of lighter 25g/20g bb weights.
 
Photo 5: TNT barrel with uncut ML Omega, combo will also work with ML barrels.
 
As well due to the longer contact patch each turn on the hop dial adds much more pressure and fine tuning can be difficult. Some players and myself included, experienced on a certain setting being abit low while the next setting being abit high and hoping there was half turn option on the MWS hop dial.
This can be overcome by switching with the next bb weight higher or lower, resulting in many different weight bbs in your bag. As well due to GBBR temperature temperaments, you may be required to change bb weight with a drastic weather change or readjusting hop setting. 
Also lower weights of around 25g become increasingly harder to use and the jump in increase per turn of the hop dial can be felt much more. 
 
I like to put Teflon tape around the hop arm to minimize later movement. 
 
Photo 6: TNT barrel + ML Omega + Laylax hop unit. Much more of a TDC affect as, hard to see in [photo 5] but due to the swing of the TM hop arm the placement of of the nub is alittle rear ward on the bucking. 
 
Photo 7: TNT barrel + max size Prommy Nub, this will not work as the TNT barrel has a bridge at the rear. 
 
Photo 8: ML barrel + max size Prommy Nub, this will work. However may be redundant as the BB sits somewhere underneath the middle, just a little behind the middle of the nub. The excessive long patch to the rear is likely a waste. You'll want to focus on a longer patch in front of the bbs path. 
 
Photo 8: quick shot of nub types and what should be compatible. ML I key requires modding to fit. 
Photo 9: other options to consider 
 
I have not mentioned the differences in nub shapes and bucking shapes. As that's up to the user, the above is just want I found to work or not work. To hopefully give you some good ideas or save you some time and to also consider some of the side affects for certain modifications. 
 
 
These would be primarily drop in/bolt on parts options asides from more custom rhops, etc. 
 
As well TM vsr barrel have a different notch from TM GBB barrels. But GBB and vsr buckings are cross compatible. 

Guys... I have just been converted
 

Not a game changer or a tacticool bit of kit (but I do think it’s tactibloody useful !) 
battery tester from Lidl cost me a fiver , now I can clear out half the batteries in the draw ! 

Yes a custom machined, R hopped barrel currently in my mk12 for initial testing. Id have posted results but there’s been gale force winds and none stop rain for the past 3 weeks. What I can tell you is it shoots further than my Kingdom of airsoft Real sword svd which has 30 more FPS. 

Remember you’ll get joule creep with heavier BB’s. I run .36’s, but I’d start with .30’s and see how you get on and what it chrono’s at 

TM Scar-l, not only new but also completely stock which I should imagine is fairly rare.

@Super64, call my cynical if you like, but why not repost them in a few weeks when its half term, more likely to find a punter who'll pay your prices.
And no, you not being able to name the brands doesn't necessarily mean they're shite, but it does tell me that they're unlikely to be top quality 😉.

Attempting to be artsy

When you thought it was Friday yesterday.. I’ve never been so disappointed 😭

First try at green gas mod. Left ca 1 cm over the inner valve.
#thatspringtho 

Nuprol red is okay, but after using Guarder power up gas, I will stick to that for any time propane isn’t suitable. Seems to work like MAPP without the rancid smell

My MWS is happily spitting out 0.32 with the SixG nub. <Insert James Bond Villain chuckle here>

Despite the shit weather, DMR news will be here tomorrow night. I’ll just have to get wet 😂

Ok guys this is it! I have lost the fight against my rational self and ordered the gun. It should be in my hands in two weeks and I am feeling like a kid on his way to candy store. I am also spending huge amount of time on e-shops window shopping tons of upgrades, rails, stocks, sights and all other practical stuff as well. This will inevitably result into spending some more money for it in near future and because of that I had a really bad argument with my wallet. I am affraid I will have another one, even bigger, with my girlfriend when it all arrives. But it is a sacrifice I am willing to make. Long story short I am signing up to The Club.
 
What I plan is:
- six g nub
- modify tan bucking
- longer barrel
- m-lok or keymod lightweight rail
- super sexy looking stock
 
Though I have read this whole forum several times I still have some questions:
 
- Has the gun mil spec dimensions? Will real steel parts - handguards, stock a pistol grip - fit? I saw someone said BCM rail fits. Does it really fit without any modification?
- I understood I need that PTS adapter ring thingee OR use Dytac outer barrel if want to mount an AEG handguards/rails. Is it all I need or is there anything else?
- I would like to build a DMR so what inner barrel would you recommend? I saw Orga, Prometheus and Crazy jets has been mentioned before. I understand that Prometheus has some larger hop window. What is it? Is it compatible with sixG nub? We dont have limits for fps here so the more the better I suppose.
- Is it ok to prolong outer barrel with some after market extension? I would not want to have some wobbling in there or have different diameters which would bend the inner barrel etc.
 
Sorry for long post but I am really looking forward to have it. If it is only half awesome as everybody says I will be a pretty happy bastard:-D.
 
Cheers fellow MWSers.

Awesome, little SixG Super Nub arrived today. It's going in tonight...
 
 

Do it!
 
visual representation of using an mws is game:

Do it!
 
visual representation of using an mws is game:

Jesus, just imagine wearing Crye and using an MWS. Basically unstoppable