Davegolf

Mmmm ACR stock

Oh dear! A 15" rail could be nice for the new build 😛

It is rather nice, looks to be 13-15", wonder if theres an 11-12" I like the lack of excessive upper RIS, and the weight/heat holes

Love the status report hah! So that's at around 400fps yeh? When are the MWS short mags coming out!? They'd make that gun! (Visually)

Hang on G36C, that a WE GBBR? Does look pretty, that rail a PITA then!? You left your weapon light on

Yeh, I have a Magpul MOE handgaurd but you've still got the FSP weight up front, a free float rail that is designed light - like the Fortis or NOVESKE NSR for example - means any weight is kept closer the pistol grip. A Bocca isn't really much lighter than the standard TM RAS system, just a different mounting interface. Don't get me wrong a polymer handgaurd def saves weight. I have a proper Magpul (not PTS) one available 2nd hand if you did want the easiest route

I don't know exactly but it's quite a weight saving, ditching the front sight post (which I know you love), the heavy RAS setup etc. You can also run a Sopmod / Vltor style stock and lead ballast the rear, you can get a much more neutral balance that way.

Get a 7" free float rail on the MWS, that saves loads of weight, in the right place too! I think a Fortis weighs the same as a crisp packet lol!

Do you run a vertical grip? Makes a massive difference when playing for hours! Also do you were a Rig or tactical vest? Single points are way comfy if you attach them to the shoulder, as opposed to round your neck etc. Nicest slings are Vickers Tactical, HSGI or Magpul MS. Yes they are dear but they are wide, quality and secure

You saying about the weight, I was comparing the 417 and MWS, the latter is so pointy and fast in comparison!

Those MWS's been cornering you!?

You sold your Scar H

Or if your shooting high FPS cutting a length of the BIC ink tube works a treat, it's the correct OD, so cut the exact width of the hop aperture and it will also remain extremely true

So the ML relies totally on the two barrel flats to prevent rotation? The Modify bucking definitely looks very well molded! i don't know why but any Maple products have been toilet for me, maybe I get all the lemons!??

Interested in the unicorn bucking for sure!

Oh wow 😳 Could be amazing! Is it Cerakoted?

I'd add if you like realism and interaction the MWS is a joy to operate, love slapping the bolt release every mag change

The MWS mags hold 100rds+ worth of gas once modded. Having had an MP7 they are good on gas but have very small gas reservoir. I don't think there is a more efficient GBBR than the likes of the MWS & MP7 PS I'm selling an MWS haha shameless! The MWS IMO is a semi auto tool so not blasting through rounds like you would an MP7 Indoor most likely

You need The from sight to hold the forward rail ring. To achieve what you want you need a folding front sight post like Vltor's one or a free float rail system.

I don't understand what you are trying to achieve? Do you have a free float rail system to fit instead or are you just taking it apart to get to the hop unit? On the front hand guard remove the button head Allen screw near rail section T14, then the upper rail comes off. Then pull the delta ring back and the lower rail comes off. Then you can remove the front sight post with the gas tube still attached. The delta ring doesn't need the gas tube.

The metal rod (dummy gas tube) is pinned to the front sight and slot thru the delta ring and into the upper receiver. Watch some YouTube vids, its disassembly / reassembly is well covered

Ha punch that little pin out too just to the left of your red circle of doom I leave that pin out on mine as its really not necersary and just slows disassembly!

There is one small grub screw on the underside of the front sight unit, and there are 2 punch pins, you need to knock them out from the fire selector side / left side through to the mag release / right side. Take note of the pins orientation so you put them back the same way around and in the same hole.

An AEG or BASR can only impart the volume of air available within the cylinder at the expansion/power rate of the spring pushing the piston. For the most part this push is also fairly constant. With a GAS setup you have an infinite 'volume of air', and the volume required also adjusts itself automatically (via the floating valve) to whatever weight BB is being fired, its like re setting your cylinder to barrel ratio every time you shoot. Where does the extra energy come from? If you set a GBB(R) to an FPS of 328 / 1J with 0.2g for example it will for example take 1 second to accelerate the BB out of the barrel using 10cc of air (all hypothetical!) If you now load a 0.4g BB it will take 2 seconds and 20cc of air, automatically adjusted, because the heavier BB is in the barrel for more time, more energy can be imparted to it. Now when we chrono we are clocking 290 FPS, which equates to 1.5J Should explain moreover https://2shots1kill.com/joule-creep-testing/

Yeh I count out my rounds, that way you know where you are and sometimes you change mag prior to an assault or likewise. @sonofsammo make sure to lube all seals and gaskets when assembling so that everything can seat in. Got me another MWS mmmmmmm To anyone on the fence, get one! You only live once hah!