Mattcrx

Hi All, does anyone have a wiring diagram for the MR30 connector that comes in the MP5 NGRS? I plan to cut the Mini Tamiya connector off my lipo and replace with an MR30 so I can get rid of that adaptor. I assume + is the pin singled out in the connector but just want a confirm. thanks all

I’m sure iv read that the majority do fit as WE are direct clones of TM. Do you know if any companies that make upgraded parts for we? Thanks again

Hi, can anyone give me advice on upgraded parts for a gen 5 glock 19. im looking up upgrade to Guarder or Cowcow blow back housing, loading nosel, trigger and a few other bits. will the Guarder parts for a TM gen 4 fit?? thanks again Matt

Hey all! I have been running a We Glock 23 and was wondering what parts/manufacturers are interchangeable with it such as TM/Umarex etc? I would like a Glock trademarked slide for it and a few other bits. Thanks Matt

I’m sliding the hop towards the magazine as the slide says HOP-> which I assume put hop on.. pullin out towards the muzzle is hop off

It’s a Cyma CM.041PDW blue edition. It’s actually crazy that the power it is running is with the hop OFF! If I put the hop fully on it’s hitting 372s… 😳 I shot 1001 rounds last night and it did drop to 348s (hop off) and I thought brilliant it just needed bedding in… however this morning it’s straight back to 352s. Maybe the drop in power was battery going flat or everything starting to get warm etc… I’m not sure. Thanks again for all the advice guys! Looks like I’ll be stripping it myself or sending it to davescustomairsoft… Here some readings when I shot the 1001 BBs last night you can see where it hits 360s 370s as I’m putting the hop on. The last image is when it settled quite nicely but that’s after 1001 BBs

Yeah so if I ran 0.25g BBs my muzzle energy would need to be even lower to equal the max 350 of the site. I get it. so looks like iv got to change the spring! How annoying 😫

That’s a brilliant guide… not sure what spring I’d need to replace with… would simply using 0.25bb not bring it down under the 350?

So… moving the hop made it fire a hell of a lot faster. So here is the results from my Acetech tracer BT. I have tried leaving the spring engaged for a while and put a fair few mags through the gun and it’s still firing high. As you can see from the results the 352 FPS is with no hop at all as soon as I start moving the hop slide in towards the magazine it fire a hell of a lot faster. So what options do I have now? Use 0.25g BBs?? Thanks again guys!