marcouss

I see, great thank you I think the specna arms edge is not as great as they say, but for a beginner like me, its fine for the time being given what i get for the cost of this gun. Ill try improving the air seal like you said, and yes i do have minor feeding problems with the maple leaf bucking but i can trim the lips just a lil so it fits better tbf. Worst case scenario, ill just change a few parts to improve the air seal. Im definitely changing the bearings to FLT bushings though for sure as well.

How should I go about increasing the range of my gun then?

Currently, Im using the asg ultimate m105 spring, firing at 310-320 fps. My gun comes with an gate x-asr mosfet but i want to change it into the perun hybrid v2 mosfet coz it has more functions + better in some ways. The orion edge cylinder parts do have good compression but I feel it can perform smoother through upgrading the piston or piston head + aoe job. So i reckon I will change the piston +piston head. Should I change the cylinder head too? As for the nozzle I wont change it but do you think its worth changing the hop chamber to a prometheus one? Shimming + motor height adj is a defo in this project so Ill def do that to ensure a snappy trigger response. As for the gears, Ill stick with your advice and stay with what I got. Motor wise, I have a zci 22tpa motor but not sure if the asg 30k motor would be a better alternative? Overall Im trying to budget as much as I can on parts but if need be, Ill splash cash on some things, but as for the motor, asg 30k (40£) is the highest Ill pay for a motor, nothing more.

range, preferably semi

ok i see great thx

dmr kinda build, like i want to build an aeg gearing towards milsim use

Hi guys, I have a specna arms edge and want to upgrade the internals. My barrel length is 10.5" fyi and currently everything is stock apart from ml bucking + nub and zci barrel. I was thinking: 1) Lonex pom piston head/ cylinder head/ steel cylinder, shs 15 tooth piston, gg 25k lfirit motor, flt bushings or 2) Prommy piston head/ cylinder head, maxx cylinder type D, shs 15 tooth piston, asg 30k motor, flt bushings Im thinking of keeping the gears and the nozzle the same... What do you think? Is 1 better or is 2 better? or should i try another approach? Thank you for your time guys Marcouss

Hi there, i was wondering if a gg g2 gearbox shell will fit into a specna arms edge receiver? link to the gearbox shell: https://www.bullseyecountrysport.co.uk/gg-airsoft-g2-gearbox-casing-shell-8mm-softair-6mm-bbs-g-16-046-45575-p.asp Thx for reading Marcouss