Misery

@ak2m4the plastic that holds the rack in had been ground down quite a bit where the two teeth removed at the first pick up tooth  wish had took a photo of the piston when i weas replacing it

And cheers for the quick turnaround on the hop unit bud had to grind a bit of my cyma's receiver for the rotary dial but other than that fitted like a charm XD

@Rogerborgi did comment on his vid asking if it was the same shop XD,they hadnt even removed the ridge bud was just standard hopped with a flat hop nub,yeah bud i agree with both yous on that one,aint protecting was never my attention to publicly  name and shame tech could of had a bad day god i know how many of them ive had etc i know doesnt excuse it but was more to gauge wether i was over reacting or if was a common thing morre than anything bud.ill dm who ever wants to know what shop it is but i aint just going to publicly out em as bar hearing about one other issue all ive heard is gd things about the shop

I can totally see why players want to do the work themselves BUT equally if I don’t want the ballache of learning how to do the tech work on my guns I should expect the best results when I pay a supposed reputable retailer to do the work for my hard earned money ? 
as to the SR I take it it’s 2nd hand from the way you worded the post ? So question is did you have the actual bill or a copy of the bill for the work that’s supposedly been done ? Or could the seller have pulled a fast one on you and sold you their own botch job on the gun and passed it off as piss poor professional upgrade work ? 

@Druid799yup 2nd hand but low usage when purchased from sellar titan was only showing over 1000 odd rounds through it and gun was bought new pre moded from the shop yeah bud got the receipt of work deffo not a botch job from the seller bud if was any thought it could of been the seller i would of messaged or put up feedback about it rather than put up a post bud

exactly for all they knew it could of been on its way out as it bent a piston rack last outing and would still fire so imagine iot done that again and they fired the whole mag the damage would of been more than just a rack and gaurentee they wouldnt of paid for the repair. would of been the shouldnt of left it there then

or (as has happened to me, with a gun i'd willingly lent a mate) the motor height backing out, fortunately there was no damage but didn't stop him bricking it when it went far enough to stop firing.

something you'd pick up on if you knew your own gun and how it sounded, but not something some rando will get (experienced or no) if they've just picked it up.

also for all he knew the mag might have been stuffed with .48's and he'd just send £10 worth of ammo downrange......

haha yeah i willingly lent my stepson my m4 and he well nearly snapped it in half thought hed bent the outer barrel or ripped the nut off the threads but luckily had just come loose  XD

agreed as no gun sounds same

exactly bud! was .32's but like said i aint bothered bout the cost of the ammo just in my opinion and like assholes we all got em that its a dickish move to just pick someones gun up that u dont know and think its alright to use it

haha nice yeah ill be running my sr25 and a bk up m4 XD

Taking my SVD, AKMS and a Glock! 🔫😎👍

Niiiiice!!! will have the combat master aswell

nope no sleep at all night shift again XD

oh i will bud its only my 2nd game  XD

Cool. Enjoy 👍

Look like you are prepared. Load all your mags tonight and gas whatever needs gassing. Saves time at the game site and let's you have an extra coffee/fag before briefing.

Wish I was going ☹

Regards 

nah i like to setup when im there will be arriving for gates opening at 8 as only live 10 mins away XD so can have the extra cig

ahhh not gd man but real life must intervein with fun times sadly

Changing tappet plate spring on last game! Sod that I would have left it. If you did that at our site the gearbox would have had more sand in it than gears.lol

Did you get any kills though?

I ran my specna arms se-05 yesterday and boy what a performer! Got me 11 good kills.

Glad you enjoyed day though 👍

Regards 

haha it was that or i broke the shotty out but way the enemy were playing i was having to use range so couldnt use the shotty

got a fair few 1 curve shot i was impressed with

we won all the games till the last round of a team deathmatch they did at the end by the end of the first match i could barely run was funny as hell also jumped over a branch only to stumble and face plant it wished my helmet mount had a arrived as that woulda been a golden moment to have caught on film llf

yeah man was amazing cant wait for my next game

be a little bit easier than normal for me as friend does airsoft so will atleast know one person lol

Cool.you are good to go then👍

i havent looked porperly tbh but yeah knew it would be something stupid lol.

typical workies hahaha lets hope i dont have any out when there working on my house lool

He probably had it on coffee table next to an open magazine with centre spread of Royal family lol.

If trades found mine they would have to have been looking under bed.pervy bastards! Lol🤭

Regards 

haha probs have to admit theres been few times ive left one on the kitchen table if we have suddenly had to rush out for one of the kids etc so knowing my luck will happen to me lol

metal & wood, QC spring etc...

D-Boys stuff might still have a moody hop unit

but c'mon that is a lot of classic AK for tight bastids like me

if I was placing a TWG order one them might fall into my basket

cheers @Sitting Duck i may just put an order in once get my ukara as tbh thats when id be ordering the gun anyway dnt want the ukara popo at my door for removong two tone lol

I bought an 028 as a spare rifle.  I was really impressed with it tbh.  It get abused as a loan out gun, still 100% fine touch wood.  

Ended up with a couple more, all good, but as noted above, pins are better than screws. 

good to hear she's running solid.

you should definitely look at the precooking options- one of the most useful features of a premium mosfet imo.

deffo will be using that for games but just now for plinking the standard settings are bang on finaly dialed in my red site so should just need a a wee tweak at the site one mag out of 5 had feed issues but had problems with that in my step sons standard gun so reckon that one needs a new spring

when u see what its like the stresses of rof will be less than what that thing does to it loool

Anybody burns your patch your now sorted.

haha dindt even think of that one XD

ok as of 1:08am there in the uk now to wait on them clearing customs lol

haha all this talk of gu10 converters as got me spinning i hate electrics lol!!!

so do I now after all this lighting crap

haha am not surprised lol

yep right on both counts.

braw just wanted to make sure before i break out the inteli quite surprised the cheap basic asg lipo has kept the 11.1's in balance would of thought it wouldnt of been that great and would of seena  bit of varience in the cells

had to resurect one of my newish 7.4's would plug in and register as a 3s instead of 2s quick 2 second nihm blast then onot a blance charge has seemed to sorted that one put a few cyclesthrough it and seems to be ok will find out through proper use soon i hope haha

Haha. Let ya off. Get your head down.

😴

Regards 

haha would but to early for me id be up in 3 hrs lol

I'm off up the wooden hill soon. And thats difficult cause I live in a bungalow!🤭

5am start tomorrow.

@ak2m4 I would be interested in your cunning plan👍

Regards 

that was with the maple bucking and soft nub macaron one i think its called

thats what i was hoping bump up the power a little so on .2's its as close to the site limit then with the .28's and hop set for em thats easy going to be in the low 300fps if not high 290's and not over powered imo and the right way to go about it? i could be wrong on that but you guys will keep me right on that i hope lol

if the gun is under the limit when firing and hopping a .2 then for an aeg it should only go down.

however if you build the gun exactly to the limit firing and hopping a .3, then switch to .2's and turn the hop down to match it could well be over.

hence a little bit under is better for safety, 5-10fps isn't the end of the world for range but it might make the difference if you end up somewhere with a policy of whacking in .2's, turning the hop off and declaring anything 1fps over as a hot gun.

yeah i get what you mean bud i wil er ing more on the side of caution than anything whith thas dont want to make it hot with .28's ill be happy if its in the 300's

quick question @ak2m4 will you be getting anymore of those ec gearbox shells in?

I've got a small supply coming in about a week hopefully, then another large supply coming in around 7 weeks

nice one!

yeah just dont wanna spend a ton on the equipment not to like it and loose a bit having to sell 2nd hand rather find something im semi happy with knowing that if i get the better one ill have a better experience if that makes sence lol

Yeah my only thing is finding something that good quality. I know it’s only airsoft but you are still moving about and using it so I begrudge paying for something that will break. But I guess it can happen if you spend £50 or £500

hahaha aye its a minefield lol

the solution to this is when his gun needs servicing get him to do it

haha already on that so far he has done a motor and gear change and lube also compression check aswell *preshimmed by me him watching though*then put it bk together with me compressing the spring for him,hes quite a techy kid loves building stuff like the pneumatic arm kits ayou get so thought bugger it will see if hes intrested and he was

yeah man the long term implications if your were as crap as me on a board were many injurys haha did it for 20 years learned about 10-15 tricks never prgressed past they tricks had more fun near the end just skating about the ramps lol was more a social thing for me had a great laugh with mates skating away for hours going on road trips etc airsoft is replacing that only part misssing is the mates trying to get my m8 into it aswell drag him along seen as though i have the pare guns for him to use

yeah i can understand the community aspect of things, one of the things that hit hardest over lockdown.

http://www.eliteshootingcentre.co.uk/ Mike will be able to sort you out some feed lips. I think they're about £3 a pair. Try to hold your wallet back with the rest of his goodies.