Misery

im so glad i didnt pay for the original work done on my sr25 by certain shop......
so far couple weeks ago after a failure at the field found rack bent they  had grinded it down in the piston and they ground part of the piston holding the rack which has allowed it to flex and bend.then tonight decided to s hop my barrel and low and behold locktite holding the c-clip in spring on top aswell,also if im not mistaken when flat hopping your suppose to remove the mound on the inside of the rubber? well they had just threw in a flat nub and called it a day!!!

im so glad i didnt pay for the original work done on my sr25 by certain shop......
so far couple weeks ago after a failure at the field found rack bent they  had grinded it down in the piston and they ground part of the piston holding the rack which has allowed it to flex and bend.then tonight decided to s hop my barrel and low and behold locktite holding the c-clip in spring on top aswell,also if im not mistaken when flat hopping your suppose to remove the mound on the inside of the rubber? well they had just threw in a flat nub and called it a day!!!

LEVEL UP YEAAAAAAAHHHHHHH
 
although not sure how happy i am being a collaborator. makes me sound like i'm french.

The truth bomb that just got me kicked off a Warhammer 40K group when offered in response to yet another tiresome horny-teen post.
 
Clearly too close to the admins for comfort. 😆
 

hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
 

hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
 

Had to clean the hop rubber in my CM.028u.  The lad got a bit liberal with the silicone oil...
 
Bloody palaver compared to an M4, managed to crack the housing round the tiny screw that holds the underside of the battery compartment/dust cover holder/slide.  Only needed a washer to make good, and probably could have got away without using one but still.  
 
The wires are so damn short that the fuse holder sits under the cover too.  Couldn't be arsed to get the soldering iron out, and no thin wire sitting bout anyway. 
 
Not a lazy man's rifle.  
 
Namsoft next weekend and the AKs have to be in prime nick.  Dụ má mày yankee!  

Hi, ALL! 👋
Made a purchase from Patrol base, a few days ago.... now it has turned up today! 🤞😆👍
Can’t wait to do a video on this and use it in the field!!!! 🤪
(No spoilers!) 😂
💷GAMBLE💷

ahhh that time again bag packed guns packed batterys charging roll on tomoz XD

we really need agoverning body to take over this sport so it can be a recognised sport so we dont get shafted anymore than we already do!.......rant over lol XD

well thats me put about 1000 rounds thropugh the modified cm621 and am thourougly impressed with the hybrid v2 mosfet! havent played about with most of the settings but even with just active breaking on and the trigger sensitivity played with the rif is amazing :DAnyone on the look out for a new mosfet for a v2 box wait for peruns hybrid v2 ti release in the next mth or so you wont regret it and a v3 version is on its way aswell!

12:1 installed in the ak.
Shimming was literally the same, bar a different arrangement on the bevel...
 
Also, E&L gears and SHS/Rocket gears are awfully similar
 
Now, Perun, hurry the fuck up and release your new V3 mosfet.

Fuckin spiders man.
 
If you dont hear from me after a few days i've either died from sleep deprevation, accidental incineration or radiation poisoning.
 
This is no guarantee of my success so i reccommend relocation to an extrasolar location just to be sure.

ZCI plastic rotary hop fitted to the G&G, grubscrews tightened, new stiffer spring on the hop unit.  Brilliant service and price from AK2M4.
 
Rifle shoots bob on again.
 
No excuse for a new rifle now.
 
Pondering a new shell and building a 12 tooth V2 box with a hi-torque motor.  Easy enough to switch back to standard if I ever had to sell.  
 
Any recommendations gratefully received.  

AK2M4 - amazing service as usual! Answered my bone questions then got the order in the post same day

well perun have stuck true to there worde and posted the mosfets out,really cant fault there customer services actualy think they have had the best customer service of any company ive dealt with in my life so far!

have to say perun top class customer service
emailed them last night around midnight about issues with my mosfet they replied by 12pm today and will be sending out a replacement bottom v2 mosfet pcb and there next gen v2 mosfet to try in both gearboxs for them
 

"Patiently" waiting for the CYMA Platinum from the latest Negative Airsoft video to come back to me. With upgrades I'm in it for less than a stock Scorpion Evo and Luke assures me this is vastly superior!

was round at the wifes today so took both rifs and had a wee go in the garden gd old amazon box with home drawn paper target haha,both guns worked flawlessly hop set for around 50-60ft quite happy pther than noticing how noisy the 516 is compared to the 621 lol

Open to offers on all guns for sale !!

ok so i think i deffo have caught the airsoft bug bad!,itching to get out to the field for first time!,also looking at some gbb pistols and probobly stupidly looking at at going down the rabbit hole of building a dmr lol