leon1104

my gears are short stroke 4 teeth. no pme

my rps is 37-35 on 11.1 it's not fast i see this kind of builds on youtube. and it works well too

I run ssg 13: 1 40k motor and my fps drops on auto first set-up prowin hopup madpull bucking (semi 350 fps auto 300-310 fps second set-up maxx model hopup madpull bucking (semi 370 fps auto 250-260 fps I've already tested some bukings and this one works the best. what can i do in the gearbox to solve this problem.

YES I HAVE DON IT 0.32 on 40 rps NICE THX

ok but there are many different delay chips. which one should I use ?. and what I don't understand is why you have to get something from tappet plate fin. if you take some of it, the timing gets shorter or I see it wrong

I use 0.32 tippmann bbs. I use pts 150 rounds mag and the g&p 130 rounds my replica is struggling with 0.32 at 30+ rps the spring from the mag is powerful enough. with 0.32 they spit out well. what kind of fine tuning could I do to make it feed better?

i play outside skrims in the netherlands

it is possible to feed 0.30+ well at 40 rps. I recently got new mags with a powerful spring, but I can't feed it properly.

I cleaned the motor. In the beginning it did 29 rps. but soon after that it started going up to 26 rps

I have a 13: 1 ufc gearset with a shs ht motor which is weird that the rps has dropped from 34rps to 27rps. I shot about 15,000 bbs with it. The same has happened with a mate of mine. With a setup of stock 18: 1 shs motor dropped from 25rps to 20 rps. It is separate that both set-ups have 5 rps drop. What is the explanation for this?