Jump to content

LVOA-D

Members
  • Posts

    104
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by LVOA-D

  1. Hi guys, I'm thinking of selling my TM MWS to fund some other hobbies, although I haven't made up my mind yet whether or not I will. It would probably depend on what I could get for it as well. It's pretty much completely fitted with real parts from mainly Strike Industries and Magpul. Next to that there is most of the original parts, tools, spares and some additional items. Parts list currently on the MWS: Tokyo Marui MWS Iron Airsoft Flat Faced Trigger MagPul 5.56 NATO MagPul's MagPul B.A.D. Lever MagPul MIAD® GEN 1.1 Grip Kit Type 1 Black MagPul M-Lok Offset Light / Scope mount MFT BattleLink Minimalist Stock MilSpec PTS Griffin MBUS Set (Front Rear / Offset mounts) Black PTS Handguard Adapter Ring PTS Radian Raptor Ambidextrous Charging Handle Strike Industries Cobra Fang Magwell Assist Trigger Guard Black Strike Industries Enhanced Low-Profile Steel Gas Block Strike Industries Multi-Function End Plate and Anti-Rotation Castle Nut Strike Industries SI LINK Curved KeyMod / M-LOK Fore Grip Black Strike Industries Strike Rail - 13.5" Black Strike Industries UDC Ultimate Dust Cover Standard Black Strike Industries Venom Flash Hider .223 / 5.56 Strike Industries ARE-T7 Strike Industries Ultra Light Takedown pins Strike Industries Adjustable Scope Mount Cloud Defensive Light Control System / Streamlight Protac HL-X If I do decide to sell, it will only come as a complete package, no parts will be sold separately.
  2. Thanks for the input, will put them up for sale shortly
  3. Hi guys, I'm thinking of selling both my GHK AKM and my TM G17 RWA Project NOC. The AKM is basically new, shot 1 whole mag with it before hanging it on the wall as a nice piece to look at daily. No upgrades have been done to it and it only comes with 1 mag aswell. The TM G17 with the RWA slidekit I've shot a few times at some targets but also has never been "outside". It also functioned more as a piece of decoration than anything else. It also comes with just 1 (extended) original TM magazine. Next to that there is no spares as the original parts got lost while moving. The TM does have some extras though, a replica SureFire which works perfectly, constant and strobe and a non-functioning but cool looking RDS from AliExpress. So what do you guys reckon would be a fair price for these 2 beauties?
  4. LVOA-D

    THE TM MWS thread

    Might anyone be interested, I'm selling the last bit of spares and kit that were part of my old MWS. The Magpul stuff is all real. See the attached picture, I'd prefer to sell it as a package. PM for details . And on a sidenote, I've also got a new GHK AKM for sale 😁
  5. LVOA-D

    THE TM MWS thread

    The MWS is done, not spending another dime on it ©️! Next to that I still have some bits and bobs from the MWS left, and some parts from my Block II FSP build, if anyone is interested, send me a pm, everything is going relatively cheap
  6. LVOA-D

    THE TM MWS thread

    I can feel the pressure rising, lot of weight on my shoulders...I'll probably get kicked off this forum if they don't deliver within a week 😅
  7. LVOA-D

    THE TM MWS thread

    So far I've had no problems ordering from Asia really RMDavis, can't say I even noticed any delays. Ordered a few things from Angry Gun, ShooterCBGear, Samoon and J.K. Army, all arrived within about a week, mainly depending on customs. Not sure how UK customs fare compared to Dutch customs though so your experience may differ. Also, pre-welcome to the club! On a sidenote, having just completed my Block II FSP I want to move forward to another project, thus selling some bits and bobs of my build, including a bunch of original MWS parts that I have replaced with Strike Industries parts (my Strike rifle being the only complete MWS I'm keeping at the moment). Figured I'd post here first as I'd prefer getting rid of everything in 1 go. If you are interested in (preferably) the whole package or have questions regarding the parts, send me a message. The grip, stock, rail ladders and XTM kit are real Magpuls, the sights are PTS Griffin Armament replica's with offset and normal mounts, the rail is a Cerakoted Madbull rail. The charging handle, flashhider and suppressor are Angry Gun and the PEQ15 Green laser and the flashlight are Element.
  8. Some more Strike Industries parts arrived . Means the MWS is nearing actual completion, that is, if I stop browsing for new shit to put on... Also a a new grip for my AKM, really didn't like the original grip so ordered one to get free shipping, win-win! So next to the AK grip we've got a set of silly, completely unnecessary but cool looking 45 degree back-up iron sights(which can also be used as lower 1/3rd), a billet aluminum dustcover and trigger guard, a magazine release, a forward assist and some M-Lok covers!
  9. \Ordered a Magpul CTR stock for my TM MWS Block II FSP build, but instead I got a MOE, decided to keep it anyways and called in for a refund of the difference in price, which is quite substantial, next to that I got my GHK AKM deliverd aswell ❤️
  10. Without a doubt quality over quantity. I do honestly have a problem with wanting everything that is technically possible to be real steel parts which drives the price up by a lot. I just finished my Tokyo Marui Block II FSP which has some replica stuff on it(an Element light and Peq15) but it just feels so...undesirable compared to my Streamlight for instance...
  11. LVOA-D

    THE TM MWS thread

    She is finally finished, my MWS Block II FSP! Stupid stock took 2 months to arrive...and it isn't even the right one, ordered a CTR, received a MOE 😕 . Anyways, for now she is finished and since yesterday she has a little brother from another mother, a wonderful GHK AKM!
  12. LVOA-D

    THE TM MWS thread

    As said, if you want to use a real buffertube you will have to rethread. I did it myself a few weeks ago to fit my real steel Strike Industries buffertube. Because the threading is so close to real steel the rethreading took about 2 minutes with the right tool. Added bonus is that non-real steel buffer tubes still fit aswell. On my old MWS I had the Angry Gun milspec buffertube however. Not had at any problems with it, nice finish and all, nothing bad to say about it but compared to the Strike Industries buffertube the finishing wasn't AS good although that may differ per buffertube. The other tubes you link I have had no experience with by the way .
  13. LVOA-D

    THE TM MWS thread

    Considering I am based in The Netherlands I had it done by Camogun. Must say, even though for the majority of this forum it's not really useful information, but they are great. Was my first time Cerakoting and my first experience with them and they've been sound. Mailed back and forth to decide on a color, decided to send the rail in via the post and a few days later I was bombarded with these great pictures. Picked it up a few days after and had a nice chat with one of the owners who explained all the options they had for Cerakoting so all in all, I can really recommend them!
  14. LVOA-D

    THE TM MWS thread

    Sorry for hijacking this thread with my photobombs but I got my Madbull RIS II FSP rail cerakoted and picked it up today, looks absolutely stunning if I say so myself! It's for my 2nd MWS build, Block II FSP replica. Unfortunately I still do not have my FDE stock yet, last part I am missing for the build. Anyways, here are some pictures of my rail getting Cerakoted, was a black rail to start with but forgot to take pictures of it
  15. LVOA-D

    THE TM MWS thread

    Got a care package in the mail from Poland today so I am finally able to "finish" my Strike Industries build . Was only missing the takedown pins, buffer tube and adjustable scope mount, really happy with how the build turned out!
  16. LVOA-D

    THE TM MWS thread

    My new love has just arrived! Goes well with my Strike Industries build! Just awaiting the mount, Strike Industries buffer tube and takedown pins
  17. LVOA-D

    THE TM MWS thread

    My Strike Industries build so far. Decided not to sell the real steel parts after all as I am working towards my license for real practicing with real firearms. So I decided to buy a new MWS to fit it all too. As soon as they are back in stock however I will be buying another MWS to make a Block II FSP build (the one I was going to do instead of this ). So here it is, my "Strike Rifle", not finished yet but for the most part it is to my liking. Only upgrades I'm definitely going to do is get an SI Forward Assist, an SI buffertube and the SI Fang triggerguard and perhaps a set of real magpul pro mbus'.
  18. LVOA-D

    THE TM MWS thread

    Hey guys, considering I scrapped my old idea of turning my MWS into a Strike Industries fitted M4 I'm going to sell some of the Strike Industries parts to finance my new MWS build, would anyone be interested? It's the SI Strike rail 13,5", the SI forward grip, the SI gasblock(missing the screws at the moment), the SI advanced castlenut set and a rethreading tool for the barrelnut. Preferably only parting with as a set.
  19. LVOA-D

    THE TM MWS thread

    Great news! After multiple delays and other bullshittery I'm finally getting an MWS again this monday! Can't wait to hold it in my arms again 😁. Couldn't find it anywhere in stock in the Netherlands so ordered from the UK, ended being cheaper even with the shipping so kudo's to the pricing over there! Now to hoard a shitload of accesories to make it even better. Glad I kept some stuff from my previous MWS now!
  20. LVOA-D

    THE TM MWS thread

    Ok, I am back in the game! Guess I can't be helped...I am looking into making either a GHK M4 / MWS into a RIS II FSP or building something with a Geissele Mk8 rail, just for plinking though. Took me about two days before I started missing the stuff haha ✈️(that's the plane taking off with my money, destination Taiwan and Hong Kong).
  21. LVOA-D

    THE TM MWS thread

    Might anyone be interested, I am also selling my original Strike Industries Strike Rail (13,5'') and my original Strike Industries SI Link Curved Foregrip. Just sent me a PM for details. Both are unused and basically new. EDIT: Just to get it out of the way, it is real steel and the MWS upper will have to be re-threaded to fit the SI Barrel Nut. I'm also only selling as a package deal
  22. LVOA-D

    THE TM MWS thread

    Hope you thoroughly enjoy it mate! I do expect some pictures when it is finished
  23. LVOA-D

    THE TM MWS thread

    Anyone interested in this set perhaps? It’s a genuine Streamlight ProTac Rail Mount HL-X with the Cloud Defensive pressure switch mount.
×
×
  • Create New...