Jump to content

Kayzeroth

Members
  • Posts

    16
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Kayzeroth

  1. oh sorry when i said High Flow Valve im talking about the Nozzle Valve not the valve of the Magazines
  2. Now this was quite a homework bro haha, very nice presentation and interesting findings. i hope to see the same chart once you put any high valve on it to see the changes !
  3. Thanks, very glad you like it... where did you found that 6.01 410mm and what brand is it? i would like to try it too since it should be with better grouping and consistency with the shots
  4. Well, go ahead and grab some coffee and hit play on that Spotify Playlist Hello guys, Cheers from Panama City, Panama. (Central America just in case) i bought my MTR16 a couple of months ago and was waiting to be a least on half of the build i am planing to share with you guys the excitement, the process and the findings with the journey So, i have played once on a game and also several practices with my team as you can notice some scratches. I have to say that is one of the very best GBBRs that i have tested, i have shot with KWA LM4s, GHKs M4 and G5 and this is one of the most quality out of the box that i can feel. Of course upgrades are necessary to give that personality and punch that the gun deserves to have I play Milsim / Hardcore Milsim like 90% and even tho my main roll on my team is to be a sniper ( got a JG BAR10 tune up with Action Army Parts hitting 400 fps with 0.43 @3.07 Joules if you are interested) i really wanted to go for the GBBR experience by being DMR/ Assault when i have the change or not allowed to play sniper at some areas or specific games. also being one of the instructors for some drills on the Practices with my team is great to have the your very own mainstream gun :v Vanilla version of the gun was like this My Limits for DMR are 2.23J máx. – 490 FPS and for Assault are 1.60J máx. - 415 FPS did some research since i was point blank on how GBBRs worked, had a clue but definitely not a Pro. decided to go for the ORGA LEX05 6.05 410mm for the inner barrel with the Modify TAN hop up and SixG nub ( classic copy paste from the 1st pages of the thread) Dont you love that outer barrel? i really enjoy this design Since the MTR comes with a 250mm even tho it came on a 16" barrel ( a shame on my opinion) i decided to go full on outer barrel length. this barrel was a PAIN to get. since there is not much sites that sell them ( as far as i know) tried but finally got it from French (i believe) with POWAIR6. here you can appreciate the good work of Dave. fitting perfectly and in symphony with the Modify TAN that has a singular density... perhaps i will try the Maple Leaf Autobot and Decepticon here since i use them on my Sniper having good results just to see or confirm the findings of Wolf1 on the first pages of the thread regarding the hop up buckings. something i have to mention is that TM put Thread Lock on everything on the barrel, from the muzzle break to the NUTS! wink wink.... it was a PAIN in the ass to unscrew all the nuts from the M-Lok barrel, took hammer, a nail, and 4 arms to hold it and being able to take it apart... i though i would damage the inlays for the tool with it.. and to put it back was a pain too. while hammering the middle section, hit o the threads for the outer nut and was almost impossible to put back in. So after installing these, i literally got NO changes on the chrono neither FPS or JOULES change with these. i was expecting at least some 20-40 fps up due to the length of the barrel. but it looks like what i gain on length, i loose it on the bore of the barrel. since is a 6.05. i originally was looking for a 6.01 but was not able to find anyone anywhere. well there was some 6.01 but most are 250 or 370 something around that, but for me that was a Nope. but yes, i had an ace under my sleeve...actually two to Power up i decided to go with some options on so called "high flow valves" on your Left (red one just in case) you will find the G&P CNC Enhanced Nozzle Valve Set 5.0 and pay attention to the numbers since they change with the number. the higher the number the higher the power. but it still adaptable with this part on your Right you will see the Dynamic Precision Enhanced Nozze Valve. Now. with the Dynamic Precision i felt a little bit happy since i see some hope to power up this thing so with the Dynamic Precision Valve i went almost 100 fps up with .50 joules up. and by the way this is with NO other Nozzle Enhanced part but the Dynamic Precision Enhanced Sealing Buffer which i find better quality than tm's original, also a bit tougher for a DMR that previous reading was still weak for what i was looking for, but dont worry , remember i got 2 aces and this time went full hardcore with no measurements or holding on the go I went with the G&P Nozzle and i have to tell you that i really was expecting, not poor quality but at least mediocre from this coming from the G&P since is a mid level quality company and it actually leave me with my jaw drop to the ground. you will see why but did not tried just the Nozzle, but went also with some upgrades for the Nozzle parts from Dynamic Precision... A full set of Enhanced Nozzle Spring Sets there is the Valve Spring, the Guide Spring, the Nozzle Return Spring they feel really good quality and the return spring is some tighter from the original and that helps on the performance installed the G&P Valve and used the Valve Stopper ( i will call this part like that since i forgot the real name) all the way from what i thought could be the max power set up... these valves comes with this so you can tune up on 3 different settings. Min- Mid- And Max power. and i got... this monstrosity 520 Fps with 0.20 at 2.52 Joules, and this is not the 1st reading, i forgot to take a picture of the first shots. it was at 2.8 joules almost at 545 fps this might be nothing compared other builds here that i know could be shooting higher and harder but for me was joy, i was astonish with the results Sadly it was TOO HOT, i actually over pass my team and also marshals limits then i decided to put it on the minimum settings, and i went down all the back like back with the TM stock valve. forgot to take a picture of this, since i started to worry, it was getting late on the day and i was worry that the last resort. the MID section will not be either enough or will still by over passing the limits...... so dismount and put everything back with the MID section... and at this point i was so frustrated that i laterally was making plans to sell the gun with everything if it does not worked out ... almost like a rage quit when you loose those ranked matches at league of legends due to some troller's fault so back to topic... my limits are 2.23 Joules - 490 FPS and then finally i was.... drums roll!!! JUST ON FUC^%&(* point!!!! i almost cried when i saw these!! nothing was in vain!! all those over time hours of receiving calls from Kumar Patel with a problem on his Outlook were worth it!!!! Finally hit this mark and im really satisfied with these results. the readings were very consistent. i have not decided with what weight i will play... thinking about some .36s or .40s depending on the results . Additionally have some extra parts. i went with the Angry Gun Hard Kick Recoil Buffer. and i got to tell you that yes there is a lot of difference on this. even tho its angry gun, it fits just fine! and by the way that whitey creamy thing is PTFE Grease.... and yes you might be thinking i am a dumb already, but i have still not find out if the is good or not for it. i cleaned it out already... putted also some on the bolt carrier but i dont think is good there so cleaned out too.... can you tell me what you use to clean and lubricate yours? so wrapping up i am very happy with this DMR/Assault build.... half way trough it. now moving o the externals if you guys have any questions or would like me to post the part list that i used including the externals you see on the picture so far just let me know or reply to the post with your inquiry! I also want to say thanks to all of those who have shared their finding, experiences and knowledge on this thread, they have been of great help, hoping to make it bigger and better!! to all of you keep up with the good work !!
  5. Long and tighter Inner barrel along side with a high flow valve. i personally recommend the G&P Nozzle Valve 5.0 (The Red One) is variable so you can control how much you can obtain!
  6. can you name or link that stock?? sick build bro, good work Guys, is it normal to not having any increase of FPS or jouls by changing the stock inner barrel 250 mm by the ORGA 6.05 410 mm, i was specting a lil bit of high fps or jouls due to the joulecreep but i literally had no change at all... i understand it should not be that much but not at all? i got like 20-30 fps when i upgraded the inner barrel of my VSR10 Sniper..... is it due to the bore of the barrel? should i get a 6.01 ? thanks for the reply guys!
  7. Hello Buddy, thats quite a long list right there haha, hop to se some pics when the thing is done i just have a quick question and appreaciate the answer for the RA-Tech Recoil Spring for INO/WA/WE/Marui MWS M4 GBB Series , which of the 3 options did you went for? the 1.6 KG, 2.2 KG or 3.3KG ? im holding on those, i asume the heavy the harder the recoil? correct me if im wrong on that, and also did you feel any change with the spring? I have already the Angry Gun Super Recoil Hard Kick version
  8. Hello guys, Today i have received a lot of parts, that i will post my findings later, but before that i just have a quick question does any of you have change the Hop Up Chamber for one of those either angry gun or Laylax CNC Hop up Chambers? if so are they any good ? is it worth the change like is a must? or more like nnaah up to your taste? Thanks for the replys !! cheers
  9. For my DMR/Assault build im thinking to get the Trinity Force Assault Combo 1-4x28 Illuminated Tactical QD Scope with Mil-Dot Reticle
  10. you may look for parts on Powair6 , JKArmy, and Rainbow8 webpages. i am from PANAMA city, PANAMA, (Latina America, Where the Panama Canal is, just in case) is a very small country with less tan 5 Million people. anyway the point is that i get the parts either from Europe or Asia, shipped to United States to a P.O Box of a Freight Company that delivers to my country, you may need just to look, there is always an option, pretty sure over there too, and even easier i believe!
  11. I am waiting for the arrival of my SixG and the Tan Bucking AND the ORGA LEX05 410mm 6.05 inner barrel, to see what can i get on the MTR16 by mirroring the build from the friendly @Wo1f who was kindly enough to share us his DMR build being able to hop .40's at 70-80 meters. Once i get all the parts i will post a full review with my findings
  12. Getting Ready for DMR build on MTR16, just ordered the SixG Nub from Dave, also ordered the ORGA LEX05 410mm barrel, but i have a question... what Rubber should i go with? i have read and i think the Modify Tan is the go, i just want to confirm if is the best option what you guys think? will be posting photos of the Vanilla, and the advance of the build including externals!!
  13. sound interesting, what is the lenght? bore? price?
  14. Hello guys! Have you heard about the Dytac or Tokyo Arms Inner Barrels? Are they any good? Im looking for a longer inner barrel for DMR build on an MTR16, but those are the only 2 brands on stock from where i have looked into Any suggestions?
  15. hello guys, does anyone knows where to get a good 6.01 400mm inner barrel? thanks in advance looking for a "DMR"ish set on a MTR16
  16. Hello Guys, Brand new on the forum, reporting in from Panama City, Panama and im enjoying the content here and i need some help to see if you guys can help me just bought a Tokyo Marui MTR16 and im looking forward to build it as a good DMR, as you may know even tho it comes with the 16 inch outer barrel, the inner barrel is just 250mm lenght im looking for 6.01 diameter and 450 or at least 400 mm inner barrel, i was looking for an ORGA who seems the best to work with the MWS set but is getting difficult to find do you guys know any online store that have some of them on stock and ships to USA? thanks in advance for the reply, and i will be posting pics of my MTR very soon!!
×
×
  • Create New...