Stratton Oakmont

For want of a nail!!!, this advert whilst not necessarily a dreamer just makes me think , why risk a sale for a cheap ass castle nut and electrical tape fix which puts the whole idea of the upgrades in question? TM HK416D upgraded Advertiser h3nSt0ne Find their other adverts Feedback 0 0 0 - Rating Type of AdvertFor sale Item ConditionUsed Time Left6 days and 7 hours - August 5, 2019 Quantity1 Price£500.00 Make An Offer Contact Advertiser

You are welcome to come and vacuum my house aggie

When I bought it it had deans wired on, I can see the red and black wires (just) where the castle nut meets the body so the wires run the full length of the stock tube rather than soldered to the contact bars. My comfy grip

I'm a short arse so the set up is to fit my stumpy arms need the afg to save my wrists from giving me gyp yes it's a lipo butt pad, otherwise standard inside so far I've skirmished it once, my sorted LCT AK out shoots it for range but it's also putting out 345 fps and has a sorted hop (to be honest all my tinkered with guns outshoot it) but the Tm now is better than the Others were stock (if that makes sense). will resist the temptation to tinker for now

China delivered an inforce WML light to go on a new (to me) Tokyo Marui hk416

Is any Aeg worth this even a fully upgraded Tm? https://www.prefired.com/ads/tm-recoil-416-devgru-fully-upgraded/

Training plates aren't for me but if they make skirmishing a bit more challenging and fun for someone then crack on - its not a h&s concern imo. If you use a gbbr and have a water bladder you are close to training plate weights anyway. No,!!!!!!!!!!!!!!!!!!!!! never felt the need to carry more dead weight, if you want to train with weight carry more useful stuff like ammo and water. just ask any marine, when carrying weight on a loadcarry do use a. Your private dumbbell/gym plates b. Rocks clue the answers b only idiots put heavy useless valuable kit to add weight because if something goes wrong and you're told to ditch the weight guess who can't because they paid good money for it  

On 11 July 2019 at 15:56, osteoshot said: and that's it, no more. excuse me while i fail to take that statement seriously..... it's true "and when Osteoshot saw the breadth of his collection he wept, for there were no more rifs to buy."

Training plates

Why?

A used tm hk416 and another wolverine inferno gen2 engine. and that's it, no more.

Final coat done, time for you all to rip it to pieces сука блять

Old faithful got a makeover/make under (depending on your point of view) because she was looking tired All ready for Sunday

New to me, full refurbish, very happy

So from this To this So so where to begin. It appears my idea of shoots perfectly is not necessarily the same as others. ive heard of tactical maracas but thought that applied to hicap magazines not the gun itself, when I stripped it down the lack of screws etc explained the noise I will just list what I had to do to get this back to what I wouid be happy with. remove all two tone paint trunion grub screws, yeah probably need those folding stock pin grub screw, yeah probably need one of those too. stripped hop unit screws, check AK lever shuffle check loose front grip reshimmed shooting straight, naah curving right after 20m new hop rubber and s-hop now dead straight zenitco pts-1 stock cheek piece bolt missing stock pin had been drilled out instead of driven so no longer exists so unable to replace with a standard one as top eyelet now had a 6mm diameter hole and bottom eyelet and stock had a 5mm hole 4mm diameter stock pin had been used so stock had a little🙄 Wobble to say the least stock 2mm too thin so had to make a spacer to go with a new custom fabricated stock pin to eliminate vertical play shimmed folding bracket now no unnecessary movement reduce from 410 to 320 fps, thankfully gearbox had been left untouched and LCT had built a good one repsray in Matt black to hide faint remnants of previous dayglo new shs motor because I had one knocking about new wiring harness with thicker silicon wire and xt60 connectors just needs a gate Titan to shorten the trigger remove contact trigger issues in the 7.4 lipo and its cqb ready good job I like AK variants!!!!!!!!!!

Just swapped this for my ares honey badger the red paint will be removed to return it to its former stealthy black although it needs a bit of tlc, missing grub screws and some hop tweaks but will soon be a cqb monster If anyone has a spare LCT folding stock pin I would be interested

Update, very happy, throwing .32's out to 70m with very little noise. Plenty of people wondering where the hell they were coming from. will be very hard to use my aegs in woodland again after this when sneaking around is required as this is soooo quiet

Brain exploder LCT Sr-3m 3D printed rail wolverine inferno gen 2 .32,bbs roll on Saturday

The new favourite, yes that is a glint of red in the gearbox. extended barrel runs into mock suppressor for 2/3 length and then it's no longer a mock but an integrated working suppressor complete with sound deadening foam oh yeah!!!!! Very quiet brain exploder 3D printed mount is spot on and means I can still fold the stock Now it really is a suppressed Russian short range sniper with the ability to easily run as a DMR

Burn it!!!!

Me,me,me please Fletcher Reede

An as-val but close enough I may run a ps-01 or something similar when funds allow but there are more things to be done to it before then,

New toy alert With his new comrades

Could be If you can work it out from the clue below you should worry because that means your mind works like mine hosea 8:7