-
Posts
642 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Status Updates posted by kasaran
-
Ignoring the boot drama in GenHelp. Good day at the MAW, shottie ran well and the ZCI barrel I put in the M16 is for the trash. Put a maple leaf in it and the difference is night and day
-
Whats the opinions on VFC GBBr's? eyeing the M16a1/XM177e2 at the moment. its a brand i have not had any dealings with so far
-
sooo, somehow bent in one of the prongs of my tm recoil mk18.... considering how thick it is, i am amazed, anyone done this and successfully bent it back? its too narrow now for bbs. It makes a good tuning fork as it is now
-
run down to todays game. M16 zci inner barrel clean did not fix the woeful scatter gun accuracy. it was fine the first 3 outings. might try and get a new hop rubber. unless this is the cautionary tail for zci QC.
Also, one of my tm 5-7 mags seems to have had the seal blow at the top. it was stored containing ASG matinence gas. so thats another thing to fix...
-
Anyone else buy that 3d printed pistol stand from the midlands airsoft fair? being told it is made to fit any double stack pistol, it was 3mm too wide for a M9, P226, Grach, 5-7, G19 and desert eagle... it was cheap, and after a time with a dremmel it works great. but amazed at how off the fitment was
-
"any double stack"
Doesnt even fit a glock.....
That's some top tier sizing right there
-
- PureSilver and kasaran
- 2
-
-
the annoyance of finding out that nuprol vn short midcap mags dont fit or feed into a G&P M16a1
- Show previous comments 1 more
-
well, compared to the G&P vn mags, the plastic top was double the thickness on the Nuprols. a file down later as @Rogerborg said and its a tight fit, but they go in with a love tap and feed now.
-
Anyone regularly use FBS Ball Grenades? i brought 3 from jdairsoft, and on two of them the fuse blew when i pulled the ring and didnt dentonate beyond. only 1 out of 3 worked... bit of an unreasonable failure rate
-
Never had an issue with FBS ball grenades not going off. I believe the ring pull pyro need to be pulled in a specific direction/way to ignite properly which is why I stick with the striker top version. I made velcro patches of striker paper I put on my gear so even if I lose the striker top of the grenade, I can still light it.
-
Great game at Finmere C&C today, pitty I had to go a little early. RPK was doing some work. And the biggest thank you goes to the 'press' guy for the best revive of the day, you know who you are!
-
funny how in my early airsoft 'career' i amassed a plethora of nimh batteries of all different sizes. now i just put the same 7.4 lipo in basically everything but the couple of pews that wont fit them
-
Nice to see royal mail working well. Two orders were due today. The parcel from AK2M4 arrived fine. The tracked 24hr package from bullseye was due today. But the last update was 'arrived at your local depot' at 9am this morning.... all I wanted to fit my new barrels tonight so i can test my pews while home alone
- Show previous comments 3 more
-
loads of reports of bb crud build up, although it could be from people not cleaning their pipes properly. personally i always cleaned mine after every game-day. what could be happening with zci is the molds they use need replacing. this is why I've invested quite a lot in getting my own made now under the XT brand. if you haven't already seen check out the borescope video
-
I assume an MWS with an M16A2/4 body kit would be better than the WE M16A3 GBBr.... asking for a friend
-
5 weeks since my ankle got twisted after being run into at the MAW and now I can be upright without swelling.
Heres to hoping I can run around the woods again soon (or im going to have one massive but sad carboot sale)
-
AK2M4 get your 495mm/499mm barrels in stock plz
-
cant remember, do you get an email if your ukara gets renewed?
-
ZCI barrel and maple hop fitted into the cyma ak fine with some minor gains. 267-273fps went up to 293-304fps. Would have liked more, curious as to the increased bracket of fps too.
Wonder what it means for my cylinder volume, would a shorter or longer barrel of the same narrowed diameter have provided better gains? its gone from a 6.03 or 6.08x450 (sources vary depending on patrol base or taiwangun) to a 6.02x450.
If cyma made the cylinder volume a perfect match, I guess I should try a slightly longer barrel...
-
review of the Specna Arms easy change spring... its a lie. It doesnt count when you need to take the gear box out of the receiver... or try to, realising you need to by the worlds smallest allen key to remove a grub screw from the mag release
-
If you get to a point when you think your collection is complete, do you find yourself planning on tinkering and upgrading?
on that note, AK hop ups.... is the nub the same as normal M4 style ones or do i need to look for different things?
- Show previous comments 2 more
-
Quote
If you get to a point when you think your collection is complete
I'll let you know if I ever get there.
-
My collection IS complete.
Four AEGs, one bolt action, one NBB pistol, three GBBs.
All tweaked and tinkered with multiple times. Don't think I'll buy anything else in the near future.
Right now I'm throwing myself into the endless money pit because I want to turn my 933 (that is not a 933 anymore) into the lightest gun I can build for my 24+ hour games
-
anyone know how to take the foregrip off a specna arms H04? mine has a slight wobble. cant work out how to tighten let alone remove to shim
-
Are Geoff's bio BB bags also bio? Because the bags are falling apart in storage. The bbs within are still good though.
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
spot the difference?
https://www.patrolbase.co.uk/specna-arms-sa-h04-one-pdw-aeg?pv=16601
https://jdairsoft.net/primary/assault/24/specna-arrms-sa-h04-one-carbine
Kinda want one, but confused over the pictures, would rather the PB sighted one... but for £20...
-
Yesterday was a reminder of why i have sank so much money into this game. Was an awesome day, pulled off some sneaky plays and came away buzzing, still was this morning.
-
Leaking 40 Mike fill valve. cleaning: no fix, soaking in silicone oil: no fix... its leaking on the low pressure maintinence gas too... any advice?