-
Posts
642 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Status Replies posted by kasaran
-
Ignoring the boot drama in GenHelp. Good day at the MAW, shottie ran well and the ZCI barrel I put in the M16 is for the trash. Put a maple leaf in it and the difference is night and day
-
Whats the opinions on VFC GBBr's? eyeing the M16a1/XM177e2 at the moment. its a brand i have not had any dealings with so far
-
the annoyance of finding out that nuprol vn short midcap mags dont fit or feed into a G&P M16a1
-
well, compared to the G&P vn mags, the plastic top was double the thickness on the Nuprols. a file down later as @Rogerborg said and its a tight fit, but they go in with a love tap and feed now.
-
-
Anyone regularly use FBS Ball Grenades? i brought 3 from jdairsoft, and on two of them the fuse blew when i pulled the ring and didnt dentonate beyond. only 1 out of 3 worked... bit of an unreasonable failure rate
-
Are Revision anti-fog wipes supposed to be... dry?
-
Nice to see royal mail working well. Two orders were due today. The parcel from AK2M4 arrived fine. The tracked 24hr package from bullseye was due today. But the last update was 'arrived at your local depot' at 9am this morning.... all I wanted to fit my new barrels tonight so i can test my pews while home alone
-
Nice to see royal mail working well. Two orders were due today. The parcel from AK2M4 arrived fine. The tracked 24hr package from bullseye was due today. But the last update was 'arrived at your local depot' at 9am this morning.... all I wanted to fit my new barrels tonight so i can test my pews while home alone
-
Nice to see royal mail working well. Two orders were due today. The parcel from AK2M4 arrived fine. The tracked 24hr package from bullseye was due today. But the last update was 'arrived at your local depot' at 9am this morning.... all I wanted to fit my new barrels tonight so i can test my pews while home alone
-
I assume an MWS with an M16A2/4 body kit would be better than the WE M16A3 GBBr.... asking for a friend
-
AK2M4 get your 495mm/499mm barrels in stock plz
-
cant remember, do you get an email if your ukara gets renewed?
-
ZCI barrel and maple hop fitted into the cyma ak fine with some minor gains. 267-273fps went up to 293-304fps. Would have liked more, curious as to the increased bracket of fps too.
Wonder what it means for my cylinder volume, would a shorter or longer barrel of the same narrowed diameter have provided better gains? its gone from a 6.03 or 6.08x450 (sources vary depending on patrol base or taiwangun) to a 6.02x450.
If cyma made the cylinder volume a perfect match, I guess I should try a slightly longer barrel...
-
review of the Specna Arms easy change spring... its a lie. It doesnt count when you need to take the gear box out of the receiver... or try to, realising you need to by the worlds smallest allen key to remove a grub screw from the mag release
-
review of the Specna Arms easy change spring... its a lie. It doesnt count when you need to take the gear box out of the receiver... or try to, realising you need to by the worlds smallest allen key to remove a grub screw from the mag release
-
If you get to a point when you think your collection is complete, do you find yourself planning on tinkering and upgrading?
on that note, AK hop ups.... is the nub the same as normal M4 style ones or do i need to look for different things?
-
Good to know, as I have a few AK's that may get a new hop rubber and barrel set.
I chono'd all my non-TM pews and figured that, as my M16 got a major fps jump from just a barrel change, why not try that on other low powered pews...
I made a spreadsheet of power ranges with 0.2s and stock barrel information. I had time on my hands...
-
-
anyone know how to take the foregrip off a specna arms H04? mine has a slight wobble. cant work out how to tighten let alone remove to shim
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
https://airsoftfinmere.co.uk/site-rules/ yeah, could see if i could half cycle while on auto. gonna try barrel swapping tomorrow though
-
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?
-
So ZCI hop up and new barrel upped the fps of my m16 to 356 on 0.2, 312 on 0.25 and 296 on 0.28.... How can i drop it down by 10fps? only thing i can think of is sawing off 1cm of barrel?