Jump to content

Immortal

Members
  • Posts

    1,155
  • Joined

  • Last visited

  • Days Won

    11
  • Feedback

    100%

Everything posted by Immortal

  1. I watched the film "Glass" earlier; the Beast gets shot by a bloke with an SRS Covert at the end. 😎 First film I've seen one in.
  2. Have you tried putting a blob of silicon on the valve?
  3. No idea to be fair, I've not been there before. They do have a home team which is often a point of contention so for all I know the player being defended could have been a home team player - I really don't know. However I do know regardless he shouldn't be getting physical with the customers - he should be defusing not agitating/assaulting. I'll not return there. Personally I had no issue but I didn't enjoy the layout or games, they didn't flow. Anyway back to SRS chat.
  4. Had a similar outing on Sunday too. Wind was whipping about and changing directions. I did try to make some changes on the fly but as the wind was sketchy it was difficult to get a baseline. Still for a first outing it was a good test. I stripped the rifle the following day as I think the bucking wasn't quite perfect and it seems a lot better now (accuracy etc). Seemed alright at home and played up on the day - typical! It was also a site I'd not played at before (meh...) which didn't add to the day, they don't give anytime for setting up which is fine but most places I go allow players to do their own thing a little if needed rather than having Marhsals start shooting at you when you've clearly ducked out the game for a reason - even after one had asked why I was not playing. In fact one Marhsal assaulted a player on my team so I'll not be returning there anytime soon. Two players were having a light arguement over hit calling and the Marshal grabbed one player and went to pin him to a tree shouting insults in his face! Never seen that before. Not impressed... I'll find out for sure next game how my rebuild holdsup. One thing I would say is it was amazingly quiet and a pleasure to shoot ignoring issues of the day.
  5. I tried the WD40 version PTFE, amazing difference isn't it. I've done the same with my VSR too. I also used the Muc-off disc brake cleaner on the VSR trigger set too and dry lubed that. I'll do the same with the SRS trigger once it's had a bit of use. Sooo much better than wet stuff.
  6. 3D printed ext part (need to find some button head screw or print some washers).
  7. Okey dokey, pig in a pokey... SO I've installed the following on my SRS A1 Covert 16"= W.A.S.P adjustable weight piston with full airbrake and heavy steel outer tube (heaviest of 3 supplied). 3 preload spring guide washers that come with the above piston. Rapax APS2 Style Spring (2+ Joule) Maple Leaf "The Last" hop unit. Maple Leaf 410mm Crazy Jet barrel. Maple Leaf "Maximum Range" 50 deg bucking. Chrono on 0.43 = 340fps (2fps deviation going lower not higher) Hopping perfectly in my limited range of 30m (so not a true test of accuracy etc but bang on the money where I was targeting) Obviously none of it has bedded in properly yet but very pleased with the results. This spring is very easy to cock even with the preload. In the end I bought and mounted a VISIONKING 1.25-5x26mm - very happy with the choice, eye relief, clarity, etc... Interestingly (although limited to the range I can shoot in the garden) I didn't have to dial it in! Crazy... it was just exactly where I dialed the hop by coincidence. I did the hop before I looked through the scope. No doubt on site it may need a click or two I'm sure. All in all I can't wait to try the rif out this weekend coming. I'll report back my results. Currently 3D printing something to meld the suppressor to the foregrip. I'll get a photo once mounted. Had an issue with the suppressor I bought, it doesn't want to screw on the whole way (Grrrrrrrrr). I may buy a 14mm ccw tap and rework the threads on it at a later date. It screws on enough to work but is fugly hence the model I'm running right now to fix it - it should work well enough for now. EDIT: Oh and the Match Knob is a very nice ergo upgrade.
  8. I've always found the ML CJ barrels good; in both pistols and my VSR. I wonder if some of the bashing ML CJ get is more down to poor setup/maintenance and cheap/wrong weight ammo. (Have they dialed everything in properly...?) And finally the one thing they probably don't consider is: they're a crap shot. lol (not meant at anyone on here, I mean people's comments generally!) Edit: Also they may fit a ML CJ and think it's poor but it could be the bucking, nub, hop or all of it.
  9. Cool, I wasn't sure if the mags came with them installed as the one that came with the rif needed it to be installed. Yes, spares are a good thing. 👍 The Suppressor, Mags, dicks and knob (lol... what a phallic list) came from the banner at the top; Fire Support. I didn't get the DTSS as the covert comes with a standard CCW thread so I simply went for one I can print baffles for that's a good size (and it's a lot cheaper!). Spring, barrel and hopup came from skirmshop.co.uk I haven't done that for the SRS yet but for the VSR I did the heat shrink route, worked very well. 👍 Good tip.
  10. Knew this would be a sink hole for money... lol Ordered the Maple hop and barrel, 2 spare mags plus set of dogs dicks, a match Knob and a silencer plus a new spring.
  11. Cool, thank you for clarifying 👍 look's like I'll be finding out
  12. Curious & need a little help please; I'm looking for a 420mm barrel with a VSR cut on it. I found a "TNT Studio S+ AEG 420mm Barrel" which looks to be a hybrid with the VSR cut on it. Can anyone confirm this? I've googled it and looked at photos and I get mixed results but no confirmation. I was also looking at the Maple Leaf VSR crazy jet barrel 410mm (doesn't appear to be a 420mm version) as the "Maple Leaf "The Last" SRS Hop Unit" says it requires it but I'm thinking that's just marketing to get you to buy their barrel? I'd like to use the "The Last" SRS Hop Unit" as I want to use VSR buckings instead.
  13. I'll have a test once I get the hop up sorted. 👍
  14. Get in...Covert 16". Actually really like it (expensive mistake if I didn't... ) Temp 4x ACOG scope, hop-up's junk and has to go. Installed a W.A.S.P piston, Thumb stop on foregrip and a 2 point qd sling. I did get a more powerful spring (110 newton) and it brings it upto 491fps with a steel sleeve on the cylinder and full air brake but it's really tough to cock so I'll look at getting another spring with a lighter pull but still keeping the fps up. Swapped the mag feeder for the dogs dick, comes with one in the box so it's just lazy they don't preinstall it. Air seals are good; did the finger over barrel test and the piston held it's ground till release. I'll ad a suppressor and print some custom baffles shortly. Then probably get the rattle cans going... I'm a happy chappy overall. Thanks for the help.
  15. Thank you for the info everyone. I'll explore the options. 👍
  16. Very nice indeed, yes a little big I think (and beyond my budget for now) however I thank you all the same 👍
  17. Trying to pick a new scope without selling a Kidney. Looked at the VisionKing but it's tuned to 100yards, any other reccomendations? Nothing giant as it's going on a covert 16" so needs to be optically cool. (ha pun... )
  18. Looks like Santa (me) is giving me a new toy...
  19. Coleman seems the go to in general. I have some.
  20. Maple Leaf stock & SM W.A.S.P piston for the VSR. Only 1 screw and the mag block left from the original rifle. It's Triggers Broom...
  21. It is Christmas; write "from Santa" on the label, then nobody can object.
  22. Fire Support are selling MWS with £60 off at the mo. £425 instead of £485...
  23. Thank you. Very kind to offer, sadly I'm in Surrey so not local at all. 👍
×
×
  • Create New...