Jump to content
Airsoft Forums UK


  • Content count

  • Joined

  • Last visited

  • Feedback


About slayerkitty

  • Rank
    AF-UK Newbie

Profile Information

  • Guns
    VSR 10
    Ics M4
    TM mp5 pdw
    TM spatnez

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. slayerkitty

    gas and TM pistols?

    need some advice iv read around and still not sure.. Green gas on a TM G18c and a Desert eagle ? would it be ok to use that and only that? or should i get a different type???
  2. slayerkitty

    VSR Help tonight before game

    VSR Help tonight before game if poss please guys. i have a TM Vsr all stock, my question is i have a well or a JG Vsr cylinder and spring, would it be a good idea to put the "cheep" spring in the TM for more fps? for one game or leave the TM one in? cheers
  3. slayerkitty

    Vsr Cylinder?

    hi guys, New to the whole sniper thing, and coming back to airsoft after 5 years!. i brought myself a Vsr-10 pro, now i also got a Laylax (PSS10) Cylinder Head, i proceeded to remove the stock Cylinder head, Via a dremal, all of that went pretty good, installed the laylax head, with the plumbers tape around the thread, i get around 20 sec of air in the cylinder now, if i block the end with my finger, iv sorted the air leak in on the piston, and had a look to see where the other leak was, and iv found that its leaking from that little hole i made to remove the stock Cylinder Head, iv tried diffrent amounts of the plumber tape, to no avail, my question is... could i reinstall the stock Cylinder head and put some of that araldite/jb weld into the "hole" where the pin was to make it air tight, then Go ahead and remove/install the Laylax head, reason of installing stock head is that it wont matter that much if it brakes, im guessing it should be fine? and sort my problem out? Cheers for reading/replying. Slayerkitty