Asomodai

They are very rare especially in this country. Your best bet is to get one imported from Asia. As a new person to Airsoft I would recommend getting an AEG rather then a gas gun.

I haven't had any advice on pricing, but plenty of offers which are not what I am asking for. I am just going to have to go on gut feeling.

Tiger111hk. It will only fit the PPS Bizon or E&L AK though. It's a 5mm pin. I already have a top folder on my PPS Bizon. Just wanted a spare.

They are called retainer clips. You'll need to measure the shaft that it connects to though to get the right size

I'll PM you

Just another M4.

Spare PPS Bizon Top Folding stock. PPS Bizon Flash hider Core PN-2 Charging handle cover

Looks like they never re-opened after the second COVID lockdown. I believe they lost a family member who spear-headed the whole venture. A real shame as the owned the land and were passionate about it.

Cheers for keeping us updated. I am still weighing up between a Grach and WE Makarov. Most of my kits pre-date the Grach by at least a decade, so not sure whether to go for it or not.

I have 5 TM pistols. I use green gas, not even close to a broken slide. It happens sometimes if people upgrade the gas bearing internals for more FPS, but again, you are not upgrading anything.

Backup and you don't want to upgrade? TM all the way, they are reliable and the "Loss" of a metal slide means it will work in all but the lowest temperatures the UK has to offer. The main issues with the AA stuff is the crap rubber seals they use in the pistol itself and especially the mags, a few people I know have replaced all the rubber stuff to prevent gassing out. Take the cost of those upgrades and you might as well of got a TM. (It will still perform poorer due to the metal slide and poorer tolerances in manufacture.) Despite owning lots of odd cheaper rifles (because there are no expensive versions of them), I believe in buy once, buy right. The AA might be fine for an upgrade platform, but that's not what you are looking for.

How about comments on the ones you wouldn't want?

Something like this would be ideal Hawke Picatinny To Picatinny 0.5" / 13mm Riser - 5" / 127mm (22411) - Pull The Trigger

Hello all. Looking at streamlining my massive collection so I can afford more Russian gear and some of the more expensive bullpups out there. Just wondering what you would value some of this lot at? Majority of these have had only a couple of skirmishes each. The ones that have been upgraded are sensibly upgraded. No ridiculous ROF's (Though the F2000 come close). ----------------------------------------------- SRC XM8 in Olive Drab, In near mint condition. Has a slight trigger return problem but would be fixed before selling. Upgraded Parts list. Airsoft Pro G36 nozzle AirsoftPRO G36 Hop unit ZCI 363mm Inner barrel SHS 14 ½ Tooth Piston ZCI 18:1s Perun Mosfet SHS Selector plate Maple Leaf Macaron 60 degrees and 0hm nub SHS high Torque motor SRC XM8 DMR in Black in good condition. (Has an extended outer barrel which is not included in the photo) Upgraded Parts list. SRC Gearbox gen 3 8mm gearbox ZCI 6.02 Inner barrel 363mm AirsoftPRO G36 Hop unit SHS Air Nozzle Acetech Mosfet G&G Green with 0hm nub Lonex Helical High Torque 16:1 gears FPS Softair Piston FPS Softair Piston Head SHS/Rocket Green 16TPA Motor ------------------------------------------- JG G36E with AG36 Grenade Launcher and original long handguard. AG36 is well used but works fine, the rifle itself has some scuffs but only been used in a couple of skirmishes. Upgraded Parts list. ZCI 363mm 6.02 inner barrel AirsoftPRO G36 Hop Unit SHS Air Nozzle SLD High Torque Motor Short JJ Scope side rail for G36 Prometheus Purple Bucking. UFC V3 Spring guide SHS Stainless Steel Cylinder 4/5 Airfet Mosfet SLD 14 tooth lightweight piston ZCI Advanced Gearset 16:1 ZCI PistonHead 8 vent aluminium SHS G36 Cylinder head aluminium ZCI M90 Spring JJ LLM01 side rail for AG36 Specna Arms M16A3/M203. Has some scuffs but in good condition. I bought this used. Upgraded Parts list. ZCI Barrel 430mm barrel SHS Hop Unit Prometheus Purple Bucking/Modify flat hop nub SHS 14 Tooth piston Lonex Piston head (Pad) Lonex Cylinder Head SHS 13:1 Gears SHS 21.4mm Aluminium nozzle Perun Mosfet GP 22TPA Neo High Torque Motor SHS Cutoff Lever SHS AR Latch G&G Gearbox ------------------------------------------- SRC XM8C, Compact version of the XM8 with sliding stock. No upgrades, completely stock apart from a replaced SCAR rear sight, looks brand new. ------------------------------------------- JG SL8 DMR, With extra long SL9 Style Top Rail. Some scuffs and a small hole in the side of the receiver to unlock if gearbox locks up on semi. Upgraded Parts List Laylax 6.03 Inner barrel 509mm G&G Gearbox G&G Cutoff lever SHS Selector Plater G&G Switch Assembly SLD High Torque Motor AirsoftPRO Aluminium air nozzle Acetech Mosfet ZCI Advanced 13:1 gearset SHS One Piece Cylinder SHS full metal tooth piston SHS Flat aluminium piston head SHS V3 Steel spring guide Flat Hop ------------------------------------------- Cyma F2000 in Tan. In good overall condition. Upgraded Parts list. G&G metal Hop up unit AOLS 380mm Barrel Maple Leaf 50 Degree bucking, Ohm nub MOSFET SHS High Torque 22TPA Short stroked. Great ROF

I will haunt your dreams.

80 Metres is about typical for a fully upgraded sniper rifle. Unless you are a god tier builder.

That FPS is far too low, especially considered the barrel length and the whacking great spring you have in there. Do you have an air leak? Cock the bolt , stick your thumb over the end of the inner barrel and fire, does the air stay in the cylinder or does it leak out? You should be hitting out 100 metres with that setup. (Though that's with an M170 which if working properly will be too hot for any UK field) You should be getting about 80 metres with an M145/M150 which would be UK legal.

I had already read those sections. It appears the law there is very similar to ours (Though as an unrelated aside, they do not have anything like UKARA). They note Airsoft Ammunition as being fine to be imported or exported and that Low Powered Air Weapons are also fine, subject to import laws. On the Firearms (Excepted Air Weapons) List, it states that anything under 1.3 Joules does not require a firearms certificate. This assumes that an Airsoft Weapon under 1.3J is classed an Excepted Air Weapon This does not help me as I am sending certain parts. In the Firearms Law of 2000 it states that "Any component part of a lethal barrelled or Prohibited weapon" would mean it is a firearm part. These parts are not forming a lethal weapon. As such, the Firearms law of 2000 does not apply. So I am really not sure what to describe this as, it is not prohibited to import. Basically I want to get this to Jersey as pain free as possible, but also covering my back if something goes wrong (IE describing it as something its not). "Toy Parts" => We cant really describe it as a part as the closest definition according to Jersey law is Excepted Air Weapon part. But it's least likely to get checked. "Airsoft Parts" -> Is exactly what it is, without being specific to any laws. "Excepted Air Weapon part" => Probably the most descriptive word, but might get me aggro sending it and is more likely to get picked up on the other side for checks. For what its worth, the seller say sending it as Toy Parts should be fine... But it's my ass on the line as well.

I understand that Jersey whilst owned by the UK is technically not part of the UK. I believe they have the same laws as us and that me posting a VSR Receiver and scope rail shouldn't be a problem. But I do have to fill out a customs form. Will I be covered legally if I put Toy parts? Or should I put something like "Airsoft parts" or "Low powered air weapon parts" ? Cheers!

You would probably have to look at some Bullpups as the motors aren't in the pistol grip. There is not much weight forward of the pistol grip either which will certainly help in your situation.

Go with this one or one of the WE Glocks