occidio

It is about 3 years

I have cleaned it and I tried T8 - AG - and the old org piston seal, feels about the same. I also think it's bad in cold weather below 10 degrees, even my WE feels more snappy, it shoots, but just not as I think it should. buffer moly greased, what is that? Regarding the piston seal, shouldn't i get pressure when I hold my fingers on the holes and push the piston in, because it doesn't regardless of which nozzle I have in and I've also changed the small o-ring at the bottom

My MWS feels sluggish compared to my friend's, everything is the same in them or it should be, all the springs in the nozzle may be a different brand in his. The difference is in his complete bolt, I borrow his bolt, and my mws gets much snappier. I even think I've had his nozzle in and this was actually where the problem was, but I'm not 100% sure. I have several nozzles lying around and have tried to change them several times, but without success. Does anyone have an idea?

soft shell are no go

Thanks, but i need the flashlight on it

What can people recommend? nylon holster no go. and the price may be reasonable, does not have to be the cheapest but it also does not have to cost more than my gun 🙂 Gun GBB SSP18 And maybe an ok flashlight ?

Is a viper tech from 2012 an ok purchase? I have several GBBR weapons including TM MWS weapon, it shoots like a dream. I have looked at an viper tech because of the realism and the sound. But how does it shoot / durability compared to MWS? And is it possible to adjust FPS or buy (npas) for it?? And spare parts? The magazines that come with are King's arms and they all leak are they worth anything? i've never had kingarms mags Price 350£

Mine shoots exactly as well with 6.00 as it did with 6.03 tested at 50m on head size target and at 70m on person size object, no problems at all. same brand barrel, the joules just raises a bit.

me and my friend use 6.00 with BLS BBs. We have not had any problems in the 2 years we have been using them. But be aware that it can raise the joule a lot, depending on the length.

Name on spring?

I do not think it makes a big difference, but the plastic buffer mostly does not last forever. But there are other plastic buffer similar to TM but stronger.

I saw a review where he said that the trigger box would be worn out after some 1000 shots. But 1 review is not the same as that it is true, so I thought I should just hear the experts in here

snappy response = Gets noticeably worse

What are your experiences with alloy / high speed bolt carriers? and can the trigger box hold up to the extra speed?

My SSP1 will not shoot with my co2 mag, it works with my GG mags and it is not due to leaks. It seems more like it can not activate the valve, does anyone know how it can be fixed? This is not my video but my problem is the same and the only answer in the video is to send it back, which I would rather do without.

TM AK47 https://www.facebook.com/impulse101.jp/photos/a.1576899875926168/2889003938049082/

I have o-rings in mine so I have no gas spill at all. It takes a little longer to fill them, but I have enough time. To make sure they are completely full, I use a scale to weigh them.

Hi. I have some issues with my PDW and just want to replace the entire trigger box. Can anyone tell me PDW and M4 use the same trigger box? Both when it comes to RA TECH and the original? The reason is that when I look at RA TECH it is described on many sales pages as they fit in both, while the original is not described as such on the same pages?

I have trouble lifting .4g BBs. While .36g it can lift easily. I have over 10 clicks left when it lifts.36 When I screw I can see that the hopup, comes down further as it should and eventually it actually ends up with BBs getting stuck, so the house works as it "should" except that i can not get it to lift above .36g I have tried different types of hopup rubber, ML autoboot and MR both 60 degrees and org. . ML flat nub and now orginal nub with cord inside the hole, the problem is not that it can not press hard enough, but that it does not grip the bb enough. I've made a lot of weapons so I'm not new to the game, but this I can not figure this out? Joule approx 1.6-1.9 Any suggestions? I have looked at another hopup house and here Laylax Custom Hop-up Chamber looks most interesting, does anyone have experience with it?

The easy solution, use stronger gas. If it is below 10 degrees I use red gas and it drops a little more then I switch to black gas and I have had no problems with it, Black gas at 5 degrees does not feel stronger than GG in the summer. AG I also use their nozzel and I am VERY satisfied have had no problems with it and it is super easy to adjust and keeps adjustment perfectly however it is a V2 I completely agree. I have also had brands that worked fairly well but it is far from all brands of GG. I ALWAYS weigh my magazines, to know how much gas is in them and I can not get more gas in them by not using 0-rings. And with o rings I have significantly less gas loss = more mags can be filled per bottle. i use the ML "square" o rings

Hi. I just installed an AG v2 nozzle and can feel that the nozzle return spring is significantly harder than standard. What are the benefits and disadvantages of it

Vision king is made for RS so GBBR is no problem. Unfortunately, that makes no sense. GBBRs have the advantage that they add more energy to the bb when increasing the weight of the bb (joulecreap) But if you measure 430fps with the same bb weight after ot left the barrel, then the energy will be the same and no bb can feel when it is shot out of the barrel whether it comes from an AEG or a GBBR. So at that point they both fly as far as the energy allows, hopup is of course a factor for the length, but it is is no more magical on GBBR than AEG they do the same.

Things change, so I think it makes good sense to ask. This forum would also go completely dead if you were only allowed to ask new questions. To adjust power, there are several options. RA-tech and G&P both make a valve that can be adjusted (npas) and angry gun makes a complete nozzle, that was at least 3 options. Nozzle spring do something if it breaks why spend money without its broken? and if it breaks then you will often just be able to bend it again. lift .32g just put something hard into your nub and it will be able to lift them, I use a piece of hard "wire" copper part. Then it will be able to lift fine, I also use ML hopup rubber´, but it is not necessary to lift .32g

Yes, that is the one. I just can not find that video. Would like to be sure it was a standard MWS, my own shoots more than 420fps on a summer day and the only thing that is changed in it is the barrel.

Can anyone tell me if the Angry gun Power Gen2 nozzle can raise and lower the joule, versus the original nozzle or if it only can lower it? 🙂